all i get is a company that is called MORGAN-MERIDITH
label maker and printing?
http://www.labelmaker.com/
all i get is a company that is called MORGAN-MERIDITH
label maker and printing?
http://www.labelmaker.com/
Last edited by pelago; 03-22-2019 at 06:50 PM.
I went back and looked for the label maker that I saw yesterday, and the maker tool is $144. That is much higher than the $5 I saw it for. But I can not find where it was . The metal blanks are $5.00, and could be cut down and hand stamped.
Last edited by gmwillys; 03-23-2019 at 06:26 AM.
two steps forward and one step back.
TWO PLUGS JUST NOT FIRING, CHECKED WITH SELECTIVE INTERCHANGE BY SWITCHING LEADS, AND THEY JUST DO NOT SPARK, WHATEVER.....BUT TIMING WAS OFF ONE GEAR
Did you reuse the old plugs, and run them through the Sonic tumbler? Seems like I remember you telling that. Every once in a while I see the military plugs go for a reasonable price. Just thumbing through eBay, there was one lot of 10 plugs for $65 plus shipping. They are on the cold range.
yeah, re used the old plugs, one is intermittent and one just does not fire, while on timing light saw that #1 just sometimes did not fire, took plug out and it would not spark when grounded. oh well, i dont always fire either and i am damn near same age as the jeep
going to go ahead and just order four new ones
At least the plug wires are good. Those would hollow out the wallet.
Last edited by pelago; 03-24-2019 at 03:33 PM.
As long as you stay on flat ground, you'll be alright. With the offset being different, the tires will be tucked up under the body more than your standard wheels. The tires can come in contact with the inner fender wells if the suspension is flexed.
Last edited by gmwillys; 03-25-2019 at 04:18 AM.
Pelago,
Send or post a picture and size of the wheels your looking for and I will check with a guy here in Akron that has a garage full of Army surplus parts he bought at a auction, some of it still has cozmaline on it.