Results 1 to 10 of 2512

Thread: well, the darn thing is out

Threaded View

  1. #11
    Senior Member pelago's Avatar
    Join Date
    May 2016
    Location
    easter north carolina
    Posts
    1,261
    METRIC VERSUS STANDARD USA!!! ran into that, pain in the ***,,, the brake fitting that kaiser sells use correct npt threads but the bolt size is metric????
    THATS THE LINE ALL RIGHT!
    the SUNDAY QUESTION ONE OF THE BOX STORES HAS PRE MEASURED 1/4" AND 5/16 inch lines, so here is the question. Oil flow and pressure, would you get the same oil flow and pressure if the size of the line is increased?? Even though i have one of those nifty line benders, my bending skills are not what they should be. worse for 1/4"???? So is there any change in oil flow if the size of that little line goes from 1/4" to 5/16" ??

    BUT AS YOU SUGGEST LESS OF A PAIN TO JUST CALL MIKE AND SEND ME THE LINE...
    BTW after 30 min of run time my oil pressure is a steady 30lbs with 30wt Real happy about that
    And the voltage on the original meter (cracked lense and all) is in the green and the simpson says 28vdc. happy about that
    Last edited by pelago; 04-15-2018 at 08:39 AM.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •