Results 1 to 3 of 3

Thread: 1956 CJ5 Speedometer gear in transfer case doesn't turn.

  1. #1
    Member Go Joe's Avatar
    Join Date
    Apr 2015
    Location
    Pella Iowa
    Posts
    30

    1956 CJ5 Speedometer gear in transfer case doesn't turn.

    My speedometer suddenly quit working. The gauge is new, the cable is good. The speedometer gear in the transfer case don't turn. Sometimes it will turn but most of the time it won't. I haven't tore it apart yet. I've never heard of a speedometer gear going bad. Has anyone else had this happen? The jeep doesn't have very many miles on it. It seems kind of weird.

  2. #2
    Member Go Joe's Avatar
    Join Date
    Apr 2015
    Location
    Pella Iowa
    Posts
    30
    I found the problem. The speedometer drive gear on the output shaft is not keyed to the shaft. If the output yoke nut comes a little bit loose, that gear will just spin in the shaft. I also found out that there is a washer between that nut and the yoke that is missing. Easy fix.

  3. #3
    Super Moderator LarrBeard's Avatar
    Join Date
    Nov 2014
    Location
    Ft. Wayne, IN
    Posts
    2,480
    Write this one down - there are some easy fixes!

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •