Results 1 to 2 of 2

Thread: New Here BRAKE / CLUTCH Question

  1. #1
    Junior Member
    Join Date
    Apr 2017
    Posts
    1

    New Here BRAKE / CLUTCH Question

    I have a 1963 Willys 4wd truck. Had it many years and never let me down. Been in Arizona 8 years. Recently I had a problem with my clutch pedal interfering with the brake pedal when I push them at the same time. Both peda;s rotate on the same horizontal shaft that comes straight out from the frame. HAS Anyone had that little problem? It's Ok if you know it just press brake after its out of gear but sometimes the brakes wont push if the clutch is depressed. THANKS A LOT I have 25 years jeep truck ownership experience with you.

  2. #2
    Super Moderator LarrBeard's Avatar
    Join Date
    Nov 2014
    Location
    Ft. Wayne, IN
    Posts
    2,482
    I would suspect that the holes at the bottom of the pedals, the holes the mounting shaft goes through, have worn and let the pedals wobble to the point that they can interfere with one another. Could be wear on the bracket/shaft.

    Those pedals can wear out - they were seldom greased.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •