Results 1 to 1 of 1

Thread: Distributor Conversion ID

  1. #1
    Junior Member
    Join Date
    Jul 2018
    Posts
    29

    Distributor Conversion ID

    I know this is reaching but could anyone possibly ID this distributor? The 62 CJ-5 I recently bought was converted from 6 to 12volts. I'd been having a backfire problem and decided to ohms check the 12 volt Standard UC-12 (external resistor) ignition coil. Primary checked good (1.8 ohms). Secondary circuit checked open. I thought I would also check the ignition module in the distributor but don't know the values it needs to be. Dist1 (1).jpg
    UPDATE: I discovered the item is sold on this web site! Part number 923068. I just need to find the specs/values to measure the pickup coil.
    Last edited by Lyle462; 08-05-2018 at 09:02 PM. Reason: Update

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •