Results 1 to 3 of 3

Thread: Front Brake Access

  1. #1
    Junior Member
    Join Date
    Nov 2017
    Posts
    5

    Front Brake Access

    First time removing the front hub assemble to access the brakes.
    I removed the 6 locking hub bolts, pulled the locking hub, and I find a snap ring holding additional gear parts. I'm a little lost as to what I do next.
    IMG_2252.jpg
    Last edited by CRWillys; 03-16-2019 at 05:34 PM.

  2. #2
    Junior Member
    Join Date
    Nov 2017
    Posts
    5
    I found out how to remove the flange however I'm still stuck trying to access the locking nuts so I can remove the drum. I'm dealing with what seams to be a washer with a rubber gasket around it. How do I remove the washer (has 3 dimples as you can see in the pics)?Attachment 4128Attachment 4129

  3. #3
    Super Moderator gmwillys's Avatar
    Join Date
    Aug 2017
    Location
    Alabama
    Posts
    3,570
    There is an outside snap ring on the splines, which you no doubt found. Then there is a large inside snap ring or spring steel ring that goes around the inside of the hub. This holds the guts in for the lock out hub. Use a pick to find the gap in the ring, and work it out of the groove. The hub nuts are located behind the lock out hub internals.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •