Activity Stream

Now you're working it 56! You are going to love being able to get to everything. The ring gear is "sweated" to the flywheel. It takes a little...

Thank you guys for the tips, the lifting hook gm mentioned looks like it would work great. For removal it would be fine, but I wouldn't want to leave...

The PNW bring it on! Nice work

And pnce again, beautiful tech manual grade photographs! I'm as impressed by them as I am the quality of work in the whole project.

You are having fun with this one that's for sure! Nice work. What are you going to do when you finish it? Your going to be hard pressed to follow up...

Continued from above.... Filter material is sealed into the end caps with adhesive. Ready and awaiting a clean fuel tank for...

Continued from above... The new Stainless Steel filter from Peter Debella's is available as a stand alone filter or you can purchase it as...

Continued from above... The original filter has deformed allowing a gap to open up at the bottom mounting plate, allowing crud and...

Continued from above... Going back together. Input shaft in place to align the clutch disk. Manual calls for 12-17 ft/lbs of torque...

Waiting on a couple transfer case parts to arrive so we can finish that project up. Time to get a couple smaller items out of the way while we wait....

Thanks David but, even a blind squirrel finds a nut sometimes! Now if you could just convince my wife.... From what you have illustrated, it...

Have I ever mentioned how awesome and brilliant you are! I made the changes you suggested and the main shaft does not turn. Before I finish the...

The easiest way is to shift the transmission into two gears at once. With the cover off the transmission, engage first or reverse, and also second or...

I finally had a good nights sleep yesterday. Today I wanted to torque the transfer case input gear on to the T-86 output shaft. The spec is...

Eureka!! Thanks 56willys (and of course everybody else). I don't have the bracket for the firewall mount, but see exactly where mine bolted up to...

Not sure if this will help, my cj5 has a cane style handle.(I'm assuming that is because it's early in production) But it just bolts right on the...

My absolute favorite track. Nothing like Talladega.

Thanks GM. I am 100% dialed in on how everything hooks up on the t-case end. I've even seen more cable routing pics on the ECJ5 forum too. I have...

Talladega campgrounds is always a great place to wet your whistle with homemade hooch. Some really good, but others not so much.

The CJ5s used the style that you are showing, the twist lock handle that mounts up under the dash lip. The spring that mounts from the frame ear...

I think I've figured out that the cable I have is not correct. Neither is my cane description, I have a t-handle. I still have no idea how/where...

Parts should be here in a couple days and the parking brake should be complete. But as with every step of this process, I find myself with more...

No Mark, Digger or Killer Beaz? I found the same problem with commercialization when I was in Nashville last year. Luckily, at PIR for the NASCAR...

The Alabama mash doesn't hold a candle to the stuff from Tennessee. With all the commercialization of the shine business, the good stuff is harder...

You bring some of that fine Alabama Mash, and you are on gm!

If one ever gets the chance to go and experience the Toledo Jeep Fest, it is well worth your time. Toledo is a wonderful city, and the folks are...

True, the smell of burning brakes wasn't the only foul smell that there was in the air. I wasn't a first responder in regards to being on the fire...

LOL, Probably better following the extinguishers

Re: Fuel Tanker Fire I'll bet there was another trail you could have used to track him as well!