Activity Stream

Steve, again no sealer on the studs, they do not enter the water jacket. They are installed finger tight only. Reference the service manual. There...

Steve, I think your OK. I thought way back, in one of your threads, you mentioned bolts instead of studs were in your engine. I have said it a few...

“A person who never made a mistake never tried anything new.” —Albert Einstein. '56, if the fuel line was damaged, then it was probably ready for...

A. Every one of us has, at one time or another, managed to split a gas or oil line while we do something else on the engine. That's not being an...

It should have a spring and a valve in it 56'. They were serviceable back in the day. Some "bubba's" took the spring and valve out and threw them...

Awhile ago I found a Crack in the pcv line between the head and the side valve cover. Well, I'm just getting around to fixing it (I just put a plug...

Welcome Blakeyjr13! Count the teeth on your flywheel. You never know what might be in there. The 9 tooth starter is for the 124 tooth flywheel...

maybe the wrong tooth count on the flywheel, a nine tooth starter needs a 126 tooth fly wheel ring, there are 3 different choices

B, I just ordered that Gel-Pro gasket from that link you provided, I will return the copper gasket when it arrives. What you wrote makes perfect...

Steve, I would not use the copper. The modern technology in the newer designed Fel-Pro gasket will definitely help you with a successful seal. Re...

Thanks B.... I know the deck was surfaced as was the head.... I went to shop today and machinist confirmed it was a crack, I gave him the head that...

Steve, I believe you have a few things going on there. I would not use a copper gasket unless I was sure both surfaces were milled flat. Copper...

B, here's what I found.....First the cooling system as far as I know is not building pressure because the radiator neck is not sealing with the cap,...

Yep, the seat works perfectly and can be found pretty cheap at swapmeats. That support isn't factory, it was extended with all thread by the previous...

Did it have bolts in it Steve? If it did or someone had some in prior, it is common for the shank on the bolt head to be longer than the cylinder...

Thanks B, I managed to get some pressure in cooling system, anti freeze is in #3 cylinder, so im hoping head gasket or a head, as long as block is...

It is concerning that it wants a lot more room and is pushing the water that hard. If it was full of air, it will push the water out until the air is...

Small and many bubbles, so much so I cant see the coolant The head was already on when I got the engine back as I had the rebuilder assemble the...

Steve, when you say bubbles what are you seeing? Large burps or small and many? If you are leaking water into the motor or out of the motor you will...

That's good info to know, 56, regarding the YJ Wrangler rear seat fitting in there so nicely. I've been wondering about a rear seat for my CJ. My...

I just received the cards. Wow theses are high quality. Very, very nice!

Agreed! Well done Senior Chief!

Welcome Steep Creeper! We will sure help out whatever you have questions on. Don't sweat the small stuff as far as the computer, we can figure it...

Welcome aboard Mark! As Bmorgil alluded to, if you pull the choke out to richen the fuel mixture, does the engine run better? If it does, then...

The seat covers look awesome! We have an old Thrush glass pack on the Heep. It stays tucked up within the frame rail but is sturdy enough to...

I love those seat covers 56'!

Here's a video of what Flossy sounds like with the supertrapp muffler! https://youtu.be/uiUbvskBLnA?si=3EqRMC4LzAwmwoMB This is probably the last...