Activity Stream

A few words about alternators: https://willysjeepforum.kaiserwillys.com/showthread.php?2734-6-volt-to-12-volt-Conversion-The-Easy-Way Since you...

Couple pics from Saturday. Jeep is impressive in snow!

Alternator died on me over the weekend! I bought a GM alt coupe years ago and still have it + the new pulley required to use the original belt....

I'm know the '46 Heep has one, but was it original or did I pull it from the military stock?.... That was before yesterday, so I don't remember. I...

Looking good davide. I agree, the previous fender washer left its impression.

Welcome Park McClung, Facebook marketplace or Craigslist is my first stop for things of this matter. The last resort is Ebay, since they...

I agree with Bmorgil, remove the front clip with the fenders. That will give you the best way to see exactly what you are doing. Save the standing...

That is interesting 56', I did not think it was used on anything but military vehicles. The story goes, it assisted in keeping the fan out of the...

I think it is much easier to work on with the fenders off. The transfer case, transmission, and engine assembly will get gangly if you try to pull...

Thanks guys as always! I love hearing the stories and tips from those who have experienced what I haven't. Helps me think of things with better...

Just for your information; both of my CJs have a cable from the crossmember to the bellhousing. Some civilian jeeps must have had it, maybe some...

The more I look at this and the more feedback I get, I believe a previous owner pieced together a quick fix. Check out how the fender washer fits...

That's it, very helpful, thank you

That is for the motor control tether aka "Stay Cable". I don't think it was used on anything but the military versions. It was to control movement of...

Thanks guys, i was able to track 1 down thru midwest willys

I think this bell housing has the foot starter clips you need. The seller may be willing to sell you just the clips? Good luck: ...

Nemo, its a good thing you are a member of this site! Hablo español como Tarzán. I thought you were working on a no spark issue. Carl's solution...

Thanks, I am excited to get started. " looking forward to answering any questions you might have" Thanks, I am sure there will be a lot!

La solucion fue arreglo en la admision. la bomba estaba rota.:)

Gracias amigos amantes de los Jeep`s. Tienen un magnifico lugar para comprar, y dialogar sobre nuestros carros. Saludos

As LarrBeard reminds us, "Never say Willys never did anything" . Bmorgil is probably pretty close to being correct. If the part was dumped into a...

Core engines can still be had for a reasonable amount of money. When I was in High School, we had cores that we tore down and reassembled for...

Welcome Ductape! We are sure glad you found us, and are looking forward to answering any questions you might have.

A lot of mounts would fit in there. I have seen at least three different mounts. It seems the word was out to use any single stud mount you could...

That's a nice looking start Ductape! I cant think of a better project for someone who likes to work on cars. You have many options for your project....

I got the crossmember cleaned up some more, flanges straightened out and threw some primer on. I also called Mike at KW parts and asked about the...