Activity Stream

It is truly hard to believe how well it hides on there. The frozen insert sells a lot of push on knobs.

WOW! I would have never found that if hadn’t been pointed out. I cleaned the end of the cane with a scotchbrite wheel on a Dremel and had to get out...

Will give that a try thanks> Ken

Jeff I am going to bet that if you took a hard look at that shifter, you would see the insert frozen on. All the T90's had a threaded handle. The...

I can’t remember at the moment which of my T90 transmissions does not have a threaded cane. No sign there was ever any there. The knob that was on it...

Thank you sir

I ended up destroying the one that was left on mine. On the remaining, the inserts were still frozen on the sticks! As gm suggests, I had to use some...

Ken, Time has proven that you did good work 30 years ago before putting the engine to bed. As far as the shifter knobs, give the threads a shot...

It's a good thing that you are using good components in your build. If you had scrimped on quality items, the layering of the components would be a...

I think you have it full jb. There's enough in there.

Seem to be running out of room in the engine bay

Going easy generally so no one is flying out. Part of it is getting in and out. Even though the door openings are cut down to the floor its still...

Thanks guys! And yes, never to old to learn something!

The track is for the top attachment. I would stay away from mounting the bar to the windshield. It definitionally isn't the most solid point to mount...

I have a set of seat belts from EBay that are actually great and color matched if you can believe it. The dash handle seems to make people lean...

Learning comes when you least expect it, when you're not looking.

A m38A1 and CJ5s had a grab handle like what Bmorgil describes, on the dash board directly in front of the passenger's position. ...

Good news Mike!

Typically I see grab handles installed directly in front of the passenger seat. It is a common addition. So are seat belts. My bride screams as we...

I have slowed my shifting per your suggestion and the grinding is much much less. Still a little but so much better! Thanks. Going to run it for a...

I will ahve to look but I was aiming to put something in for 100 miles then change it out and think we just used some 90W gear oil. I can almost...

Against my will!

Here’s an interesting tidbit (to me anyway, ha!) A month or so ago I was at our local swap meet and was introduced to a local gentleman who “is the...

Thanks for that. The heat riser is operational. I think I may have fixed the hot start issue today. I had been having intermittent weak spark...

Gotta love thread inserts of all types. I have repaired some lost causes with them. In the right circumstance, the type of insert you use can even...

Heli Coils save the day again and again. Heli Coils and speedy sleeves are some of the greatest inventions in the modern era.

Easier than pulling a transmission/transfer case and buying an adapter plate. Heli Coil for a win. I knew this before pulling starter due to last...