PDA

View Full Version : 1962 Willys Utility Wagon custom lifted crawler.



jman7t
09-26-2014, 09:53 PM
Hello all, for the past 8 years I have been building my utility wagon that my father past on to me. It started out pearl white with stock ride height on dana 30s. Under the hood is a sb ford 351w. The thing is definitely not slow. Presently, I'm replacing the small dana 30s with a dana 60 rear on chevy leafs and a dana 44 high pinion front on 6" reached leafs. Both axles are in. After some wedges, I had the driveline lined up. Now I'm cutting the knuckles to get my 6 degree caster angle to help steer my big tires (hopefully 37inch). Here are a few pics to start and I will post as I progress. I hope to be driving by first snowfall. Not done of course.

jman7t
09-26-2014, 09:56 PM
Here's where it's at, roughly, as of right now. I'm re clocking the knuckles after realigning the pumpkin to get the proper drive shaft angle.