Johan
10-20-2014, 02:25 PM
Please help me. I just removed the old fuel pump from CJ5 (engine F134). I am about to install a new fuel pump. (It is the glas bowl one without the vacuum for wipers)
The old system had a spacer in between block and the fuel pump gasket. so I want to install that spacer also again back in place. The new fuel pump only come with 1 gasket.
So now i have properly cleaned up block where fuel need to be fastened, a spacer, a fuel pump gasket and the fuel pump itself
I cant think that you would not use a gasket also between the block and the spacer.
My question:
DO I need to have a gasket also between the block and the spacer or can I just use some RVT paste (silicone gasket maker) between block and Spacer.
DO I still need to have that spacer (I read somewhere it is not necessary for the single pump)
My thought are that I need the following between the block and the fuel pump
Block, then gasket, then spacer, then gasket again and then only the fuel pump
please advice
The old system had a spacer in between block and the fuel pump gasket. so I want to install that spacer also again back in place. The new fuel pump only come with 1 gasket.
So now i have properly cleaned up block where fuel need to be fastened, a spacer, a fuel pump gasket and the fuel pump itself
I cant think that you would not use a gasket also between the block and the spacer.
My question:
DO I need to have a gasket also between the block and the spacer or can I just use some RVT paste (silicone gasket maker) between block and Spacer.
DO I still need to have that spacer (I read somewhere it is not necessary for the single pump)
My thought are that I need the following between the block and the fuel pump
Block, then gasket, then spacer, then gasket again and then only the fuel pump
please advice