PDA

View Full Version : "Barn Find" Willys Pickup



tcbquattroporte
07-21-2016, 08:42 PM
I'm brand new to this forum, so I wanted to introduce myself. I grew up on farms and ranches in New Mexico, and Jeeps were always a part of my experience. I remember one CJ-5 in particular that we had that saw years of continuous duty checking and servicing all of our irrigation wells. It had a PTO with a pulley on the rear that we connected a wide belt to that ran to a matching pulley on the pump engine drive shaft so we could start the pump engine, as they had no electric engine starters. That Jeep ran for decades, 7 days a week, 365 days a year. We also had a couple of FC-170 Forward Control trucks that we used on the ranch to haul just about anything, anywhere. I have fond memories as a kid of sitting on top of the engine cover in those trucks as there were only the two separate seats. Those trucks were real workhorses. After I was grown, my Dad bought a 53 Willys Station Wagon to drive on the ranch. I painted it for him and he drove it for many years.

I recently purchased a 1951 Willys Pickup that had been sitting for years in a field and want to get it in good running condition. Because the truck has been sitting outside with the windows down, the water, debris and dirt that collected in the floor boards has rusted them completely through, so I will be replacing them with repro pieces. Other than that and the two front bed stake pockets, there is very little rust on the truck (other than surface rust). However I do need a right rear fender, so if anyone knows of where I might find one, please let me know by contacting me at 575-616-9610 or berrytc@gmail.com.

The truck has a really nice overall "patina" and I'm thinking of leaving it the way I found it instead of stripping and painting it. My son and I have a company that makes "vintage" or "steampunk" lighting, furniture and decor parts, many of which have a rusted patina on them as well, so we thought the truck might make a neat advertisement for the business and should reflect that same look. What do you think? (I'll post some photos here soon). Have a great day.

LarrBeard
07-22-2016, 03:41 PM
Welcome to the group - let the adventure begin.

You said: "I recently purchased a 1951 Willys Pickup...".

As I looked at the photos, it appears that you have 2-wheel drive truck (2T series) - I think I see a straight front I-beam axle. The 2WD's are the red-headed step children of the Jeep world.

If this is a 2WD truck, it is probably a 1950 model year truck. By what we seem to have figured out, Willys-Overland stopped 2WD production part way into the 1950 model year, building fewer than 1000 2WD trucks in 1950. Now, back then vehicles were often titled out of the dealer as vehicles for the calendar year in which they were sold - and Kaiser-Willys-Overland did a lot of that.

Be ready for the answer "They didn't build 2WD trucks in 1951". I often got that answer looking for parts for the '48 2WD. I figured out that if I got that answer, that guy probably couldn't help me anyway.

Good Luck!

tcbquattroporte
07-22-2016, 06:29 PM
Yep, it is a 2WD and the title says 1951, so it is an odd duck, I guess, especially fitting into my car collection (see a few of them in the attached photos).....one might say it sticks out like a sore thumb. No matter, as I bought it just for fun and paid very little for it. I'm looking forward to getting it running and deciding what to do with it. Anyone know what the standard bolt pattern is for the wheels?

LarrBeard
07-23-2016, 07:34 AM
As I was looking through the old papers on my '48, I discovered the original application for my Indiana title that had the vehicle serial number on it. (Indiana made me take the original plate off the vehicle for administrative humma-humma that doesn't matter 45 years later). The serial number on the vehicle put it about a hundred vehicles into the 1949 production year, but the two-piece seat and the cloth headliner mark it as a '48. Even at the factory things got a little out of whack, but back then people wanted a truck and they weren't really all that concerned about such small stuff as we pick on today.

The truck is at the shop right now (windshield leak), so I can't measure bolt circle radius right now.

tcbquattroporte
07-23-2016, 11:14 AM
As I was looking through the old papers on my '48, I discovered the original application for my Indiana title that had the vehicle serial number on it. (Indiana made me take the original plate off the vehicle for administrative humma-humma that doesn't matter 45 years later). The serial number on the vehicle put it about a hundred vehicles into the 1949 production year, but the two-piece seat and the cloth headliner mark it as a '48. Even at the factory things got a little out of whack, but back then people wanted a truck and they weren't really all that concerned about such small stuff as we pick on today.

The truck is at the shop right now (windshield leak), so I can't measure bolt circle radius right now.

Is your truck a 2WD also? Original drive train?