PDA

View Full Version : Brake Problems - CJ3A



sahazzard
11-15-2016, 04:05 PM
While I'm at it - let me also plea for help on the brakes:

I currently have to pump the brakes three times to get pedal after doing the following:

replacing all four wheel cylinders
adjusting eccentrics on all four wheels
bleeding the brakes at least 4 times
replacing the master cylinder

Perhaps I am not bleeding them correctly

LarrBeard
11-16-2016, 07:55 AM
I'm not a brake guy, but two questions come to mind:

A: How many times have the drums been turned? If they are oversized, they can need a longer throw to get things going.

B. Brake linings? New, worn?

C. Here's a place to get more information:

http://www.cj3apage.com/cgi-bin/3Ayabb26/YaBB.pl?num=1326729291/9

These folks know everything about CJ-3's

sahazzard
11-30-2016, 05:04 PM
Hey LarrBeard, I never answered your questions:

Drums turned - no idea - they look good to me.
Brake linings - new on the rear, front look good probably 1/8" thickness and not brittle

Front eccentrics were not working properly, so I replaced one and the bottom adjusters were frozen - I tore down the front hubs this past weekend and have cleaned everything and will re-assemble and try it again. It is probably a combination of eccentric/bleeding issues.

IDGET
01-05-2017, 10:52 AM
Are you seeing the pads move on the first few pumps?