PDA

View Full Version : CJ5 1967 V6 225cu in



Razorslam
08-13-2017, 02:18 PM
Thanks for the add I live in Vancouver, WA. I have a problem with my flywheel orientation. When replacing my
clutch I decided to have the flywheel machined and my location marks were machined away. It is a heavy flywheel
specially made for the oddfire engine. I have a notch in the crankshaft hub, but I cannot configure the flywheel to the hub
Most mechanics say the flywheel will only go on one way, but not in this case, there is no alignment pin and the bolts are
all even. anybody got any input?