Btroy
08-15-2019, 06:54 PM
Hi guys I'm back and needing a little help on this turn signal issue.
Problem I am having is I can't get the turn signals to flash. I followed the wiring on the new signal unit but no matter if I use a 2 or 3 way flasher these just don't work.
It sometimes are the simplest thing that get me.
Anyway it's says red to brake switch, not sure why this would be but I did that any way. No luck.
It's simple to wire.
Red brake switch
Blue to indicator lights on the flasher
Black to ground
And a red fused link to the X terminal on the flasher.
That should be it but it's a no go.
Anyone care to share any insite or suggestions?
I'm thinking maybe the new signaling unit is bad?
Problem I am having is I can't get the turn signals to flash. I followed the wiring on the new signal unit but no matter if I use a 2 or 3 way flasher these just don't work.
It sometimes are the simplest thing that get me.
Anyway it's says red to brake switch, not sure why this would be but I did that any way. No luck.
It's simple to wire.
Red brake switch
Blue to indicator lights on the flasher
Black to ground
And a red fused link to the X terminal on the flasher.
That should be it but it's a no go.
Anyone care to share any insite or suggestions?
I'm thinking maybe the new signaling unit is bad?