PDA

View Full Version : New to forum and Military vehicle restoration



sredm
10-20-2020, 06:32 PM
Hello all

I recently purchased a 1952 M38. Its not museum quality but that is what I like. Not afraid to let the grandkids eat ice cream in it :)

This is my first historic vehicle so I will most likely have several questions

Respectfully

okiemark
10-20-2020, 06:38 PM
Congrats on your new Jeep. You have come to the right place. I got lots of help with my project as there are several who have restored old jeeps.

gmwillys
10-20-2020, 06:40 PM
Welcome sredm!

Congratulations on the purchase of your M38. We would love to see your Jeep, and will be happy to help any way we can.

LarrBeard
10-20-2020, 07:36 PM
Not afraid to let the grandkids eat ice cream in it :)

Jeeps need to filled with Kids, Grandkids and Dawgs...

bmorgil
10-21-2020, 06:09 AM
gmwillys is the United States advocate for get them running in solid mechanical condition, and "use em"! The grand kids will dream of when they get Grandpa's Jeep. These things just keep giving back.

LarrBeard
10-21-2020, 08:50 AM
Not afraid to let the grandkids eat ice cream in it :)

Jeeps need to filled with Kids, Grandkids and Dawgs...

Like this ...

bmorgil
10-21-2020, 06:09 PM
Check it out, LarrBeard has a "truck full o' grandkids"!

5JeepsAz
10-21-2020, 09:47 PM
Pics or it didn't happen! What's it look like? LarrBeard that two tire types special is growing on me. Love the paint in the sun. Ice cream for everybody...

bmorgil
10-22-2020, 06:02 AM
5jeeps, that "two tire type option really only works well on two wheel drives. Even slightly different tire diameters can raise trouble on a 4 wheel drive.

sredm, show us the pic's!

LarrBeard
10-22-2020, 11:53 AM
Totally agree - if you're 4WD, all four tires need to match. I have one of the rare 2WD trucks, so I put "road" tires on the front, basically a passenger car tread - with the gnarly tires on the rear. The rear tires do generate a bunch of road noise, but then old tricks aren't supposed to be quiet.

Over the 2019-2020 winter I had to get the truck repainted - it had serious paint adhesion issues and by pure blind luck it was covered by the original restorer's shop insurance (very long story there). BMorgil sweet talked a nice lady in the DuPont (?) Vintage Color Library to get me a modern recipe for the original 1948 Tunisian Red. It turned out even better than the original paint job, which also had color match issues if you look very closely. So, summer of 2020 I was all revved up with no place to go (sounds like a line from a Meatloaf song...).

Next year in Toledo!

5JeepsAz
10-22-2020, 08:04 PM
Starting to love your truck... thanks for the reminder on the tires, a great point. Conjured a great memory of a sunny day from my youth when an oldster told me that's one way to know if it's a two wheel drive model without getting underneath to see the front pumpkin

LarrBeard
10-23-2020, 08:13 AM
The front hubs are a lot smaller on the 2WD trucks.

The last 2WD trucks were built in 1951, designated with "473HT" in the model number - maybe for for "half-ton" although the same chassis was rated for one-ton payload the year before. Some 1951's may have been rebranded as 1952 trucks because WO would do a change on the documents to let dealers sell a truck left over from a previous model year as a current year truck.

sredm
10-26-2020, 03:37 PM
6953

Trying hard to keep the right out of a field environment look.