mhead
06-02-2021, 06:09 PM
Does anyone have a diagram showing the routing of the parking brake on the transfer case up to the handle.
gmwillys
06-03-2021, 06:30 AM
I looked through my photos and didn't have a clear picture of the parking brake cable routing, but the basic idea is that it runs from the brake assembly to the transfer case crossmember then up along the body gusset. Then it turns into the firewall to the brake handle. There are two clamps that hold the cable in place, with one being on the crossmember and the other at the gusset to prevent the cable from pinching. The diagram below shows another up under the dash, right before it terminates at the brake handle. I do not recall mine havening that clamp, but I could be mistaken.
https://www.kaiserwillys.com/media/catalog/product/auguria/interactiveimage/Emergency-Brake-View-2-2_2.jpg
Powered by vBulletin® Version 4.2.2 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.