Dana 18 Transfer Case Mount?

[JW1954WAGON]

Hey All,

Removed this T90 and there was no transfer case mount on the flange shown in pic. Assuming there should be one? I did have the 2 transmission mounts. Looks like PN 926671K on KW possibly? Thanks for any help!

11420

[JW1954WAGON]

Also missing the bracket on the crossmember for this transfer mount insulator. Anyone have a pic of that?

[gmwillys]

At least the center mount for the transmission are in place. The one on the right side is a single bolt with a conical rubber mount. Enclosed is a photo of our wagon without the drivetrain installed, and a link to the replacement rubber mounts. If you are missing the bracket on the cross member, then you will have to fabricate your own bracket because I am not aware of anyone who reproduces it.

https://www.kaiserwillys.com/products/engine-transmission-transfer-case-mount-kit-insulators-fits-58-64-truck-station-wagon-with-6-226-engine/

[dgoodenow]

I needed one of these cross member brackets awhile back and found one with Midwest Willys:

(765) 362-2247

Harry & Jo Sheets
3708 S. 100 E.
Crawfordsville, IN 47933
email: MIDWESTWILLYSLLC@GMAIL.COM

[JW1954WAGON]

Thanks All! Yes, closer to figuring this out now. There are only 2 trans mounts right on the T90 and then this on the transfer case, nothing else Im missing?

[bmorgil]

I think you got it JW!