Lift springs CJ 3a

[GringoEarl]

Anyone out there have any experience lifting a 3a? Will the 2.5 cj5 springs fit without relocating the hangers?

[bmorgil]

Hello Earl! A lot of guys have lifted them a lot of ways. If you want to do it with springs, I would use a set of lift springs designed to fit it with the lift you want. Someplace like Detroit Leaf Spring could set you up if you give them a call. I would stay away from relocating the hangers. There isn't much room on a 3A frame.

https://www.eatondetroitspring.com/

[GringoEarl]

Thanks for the information. I found thejeepsterman.com offers American made springs as well.

[GringoEarl]

http://thejeepsterman.com

[bmorgil]

He has a great PDF catalog there on that link.

I think to get a bolt in set of lift springs for a 3A, you are going to have to find a custom spring. That is the best way to lift them a small amount like 2". Stay away from a re-arch spring. They will not last long when modified as a lift spring.

You will need to change the yoke on the transfer case output and lower the transfer case. or the driveshaft angles will become excessive.
https://willysjeepforum.kaiserwillys.com/showthread.php?2206-CJ-rear-drivesahft-bind-after-lifting-or-new-springs

[GringoEarl]

Really appreciate your advice. What started as a c-19 project for me and the boys is starting to cause friction between the wife and I. Time to get Grocery Getter out the garage.

[bmorgil]

When Mama's happy, everyone is happy! I think you need a big tent....