PDA

View Full Version : Will F4-134 engine fit in CJ3A



Mikloos
03-28-2013, 09:36 AM
I have a 1951 CJ3A. Is there an easy way to install A F4-134 engine in it.I know it will bolt in ok but as you know it is too tall for hood to clear carb.I was wondering what modifications would be best and if anyone has done this.
Thanks for any info.
Mike

1948 Cal Willys Pickup
03-29-2013, 07:38 AM
Put a straight six in my 48 PU but there was no height clearance issues. I was however able to adjust the height because I put whole new engine mounts in. Not sure if there is a way to do that with your sotck mounts though. You can go to my profile, photo album, engine mounts and see the engine mounts I made. Might give you some ideas.

54willysau
04-02-2013, 01:22 AM
HI --- Have heard that you can!!!! but i would do some measure up before doing it. The carburetor is replaced with a solex unit
not sure of the model number, a few jeep owners replace with a solex carburetor
RON