Well, another thing you have become the authority on.
Printable View
Well, another thing you have become the authority on.
and that is "*** out of u and me" maybe id i did some more investigating would not be taking it all apart, but when you look at the handle assembly one side bolts down and one side allow the connecting arm between the two pivot points to attach and there was even a hole in floor that the connecting piece fit so great in.... not first time i gorped something up that have to correct and for sure am getting the two anti rattle pieces to go in also
Attachment 5749
was able to dig this up, the tool box, corner is where the base for the handle goes. HOWEVER THE TOOL OX I GOT HAS A ROUNDED CORNER, GUESS GOING TO HAVE TO GET CREATIVE IN PLACING THE HANDLE BASE
Attachment 5754
Your tool box is correct. Do you have the holes indexed for the mount? If not, no big deal. Drill it out and reach in and put nuts on the hardware.
HAVE TO DRILL, but sure is a difference in tool box in manual and the one i bought? told my grandson sometimes putting on three bolts turns into a four hour deal
The only real difference in the military and the civilian tool box is the Jeep script on the front riser panel, (at the passengers heels). Then the radio equipped jeeps had a tab at the right corner for the coms harness.
sent a email about my health now, rather long,
damn e brake kikcking my ***, However did have a good thing happen, got the correct headlight rims for the m38a1.
Attachment 5771
Looking good Ira!!!!
That is one classic Military vehicle Ira!