3 Attachment(s)
53 Pickup Axel Bearing Problem
When I took my Willys pickup to the Threshing Bee and Car Show the back right hub was smoking and very hot to the touch. When I pulled the wheel and hub off I could see why. The last person to put the hub on inserted the axel shaft key too far and it worked like a mill and destroyed the axel shaft bearing, cup, outer grease retainer and the grease shield. (I swear it wasn't me) So I took everything apart and pulled the other hub. I have ordered new seals, bearings, cups and gaskets so I can replace everything with new stuff but I can't find the shim pack for the Timken rear differential and I can't find a replacement Grease Shield. I'm wondering how I get the correct end play without shims? Can anyone let me know where I can find a shim pack for a 53 Timken differential and a grease shield? Is there a shim pack out there that I can make work? I know that most people use the old grease shield but as you can see in the attached picture mine was smacked. Any advice will be appreciated.
Another fix for LarrBeard's 48' Detroit style driveshaft problem
Larry, did you ever find a 53' with a Timken axle you can get an End Yoke off of? It appears the Timken 51540 Axle was also used in 48' through 53' Ford pickups and maybe even some cars. From what I can tell from googling the Ford's, it looks like the Ford used a Spicer style yoke and U-Joint.