Hey All,
Removed this T90 and there was no transfer case mount on the flange shown in pic. Assuming there should be one? I did have the 2 transmission mounts. Looks like PN 926671K on KW possibly? Thanks for any help!
Attachment 11420
Printable View
Hey All,
Removed this T90 and there was no transfer case mount on the flange shown in pic. Assuming there should be one? I did have the 2 transmission mounts. Looks like PN 926671K on KW possibly? Thanks for any help!
Attachment 11420
Also missing the bracket on the crossmember for this transfer mount insulator. Anyone have a pic of that?
At least the center mount for the transmission are in place. The one on the right side is a single bolt with a conical rubber mount. Enclosed is a photo of our wagon without the drivetrain installed, and a link to the replacement rubber mounts. If you are missing the bracket on the cross member, then you will have to fabricate your own bracket because I am not aware of anyone who reproduces it.
https://www.kaiserwillys.com/product...-6-226-engine/
I needed one of these cross member brackets awhile back and found one with Midwest Willys:
(765) 362-2247
Harry & Jo Sheets
3708 S. 100 E.
Crawfordsville, IN 47933
email: MIDWESTWILLYSLLC@GMAIL.COM
Thanks All! Yes, closer to figuring this out now. There are only 2 trans mounts right on the T90 and then this on the transfer case, nothing else Im missing?
I think you got it JW!