1 Attachment(s)
Fuel Pump Pin Falling Out!
Everything happens for a reason. My new oil line is leaking so I am replacing it with a "Made in USA". I put peeJ up in the air to take a look from underneath. Lo and behold the new fuel pump pivot pin has fallen out to the point it is striking the fuel pump bolt! Thank God it hit the bolt or I would have been stranded somewhere. Look close and you can see the leak and the pin! Two birds with one boulder.
Massive Oil Leak at the Filter Canaster!
I was reading a post by LarrBeard regaling us in the tale of his beautiful truck spraying oil all over his engine compartment. I thought to myself what a terrible thing to happen to such a like new super clean engine compartment. A "baptism by fire". Then I decided to dry up my last little issues with my oil lines and change out the filter for the first time since the restore. A whopping 150 miles on it. All went smooth. I had and have had trouble with that copper gasket under the filter canister bolt. The copper requires a lot of force to make it seal and a used one will never seal well. I do not like applying a lot of torque to that bolt. I have used composites but I could not come up with one "FAST ENOUGH". Oh the cost of that!
I decided to fabricate one out of some thick soft gasket material. It didn't work. Took it for a 2 mile spin. Pumped 1/2 of a quart of oil onto the underside of the hood, all over the distributor, Alternator various other parts. I got back from the ride only to see massive oil dripping from the front of the jeep to the back. Amazing the mess that causes.
Spending the day taking things apart and cleaning it all back up. Well it needed a good "dusting off" after the winter! And of course the first show of the year not cancelled due to COVID is Tuesday! I will be taking apart and cleaning for the next 2 days. I went to the Auto parts store looking for a "Willys A-1233 Gasket" for the cover bolt. On line https://www.rfjp.com/p-131-oil-filte...ket-a1233.aspx But I wanted it now and not copper! It is a 7/16" I.D. x 1" O.D. gasket. I found several assortments. I bought them all. Here we go again.
DA#@ IT!!!!!