Thank you Kev1963. I got it from the annual Turkey Rod Run at the Daytona Speedway. I'm very happy with it.
Type: Posts; User: DougL
Thank you Kev1963. I got it from the annual Turkey Rod Run at the Daytona Speedway. I'm very happy with it.
Finally got my Jeep ready to enjoy! First adventure this Sunday! Quick question, what engine oil is recommended in the F-134 and how many quarts?
I had to replace my oil gauge. Item #A1198 (Kaiser Willys) is the 10" high pressure hose from the engine block to the SS tubing. My question is, can the high pressure hose be retrofitted to connect...
Good morning! Would it be ok to dump all the fluids (differential & transfer case) and replace them with the RedLine MT90?
I'm on the Amsoil website and I don't find the MT90 you speak of. Is it possibly under a different name? I saw a "Severe Gear" 80W-90 that's synthetic, but no MT90. Can you provide me a Product Code...
Here are some recent photos. 5475 5476 5477 5478 5479
Got the electrical problem finally solved - two wires from the generator to the voltage regulator where crossed causing the generator to bypass the regulator altogether. Next week the ole girl goes...
Thanks for the input Jim. My system is mostly 12-volt already with a few exceptions that I'm trying to figure out. I was able to find a wire that accidentally fell off while replacing some frayed and...
I honestly believe my biggest issue is the voltage. We all know the M38A1 was originally 24-volt which mine is not. From what I'm seeing, it's a mixed bag of gauges, different voltages and a wiring...
My light issue was magnified to a complete meltdown. What I believed based upon the wire length was it belonged on the battery post on the back of the ignition. So I touched the wire to the post,...
I've got my speedo working. It was the actual gauge that was bad and I was able to use the "civilian" speedo cable. I rewired a lot of frayed and spliced wires behind the dash only to find out none...
Thanks TJ, but I have both speedo cables (1 just like yours) - there’s no reason why one of my cables shouldn’t work (Military version needs the correct pencil gear). I took the speedometer out and I...
Here are some pics of the gear...the more I think about it, I'm beginning to wonder if the actual speedo head isn't somehow bad.
541954185420
Thanks TJ - if I don't have the correct pencil gear, do you where I can purchase the correct one?
If it's nothing more than a 7/8" socket to remove the pencil gear to look, then I'll give a shot.
I actually have both speedO's (military & civilian) and right now the only thing I haven't replaced is the actual head unit (speedometer). I was told the civilian speedO wouldn't work with the head...
No, the "pencil gear" doesn't have the slot and will not match up with the "military" speedO cable I now have.
I originally had the "civilian" speedO cable and that didn't work with the head unit. It was Kaiser who sold me the "military" version and this is cable that has the "little lip" you mentioned. I've...
Yes, I'll be getting a refund for that debacle.
They cannot produce the correct one. It seems like I bought the last one AutoZone carried and it was packaged wrong. Then they referred me to Amazon for the Standard Motor Products VR-11. After some...
5363
You tell me!
What's confusing is the specs for the VR1261 voltage regulator from AutoZone says it's "12-volt" but on the actual regulator case it says "6-volt". And of course after smoking the new regulator, I...
I installed the voltage regulator LarrBeard and after starting it, the new voltage regulator began smoking. The Arm wire melted and I probably fried the voltage regulator too. I did notice this...
5334 5335
The generator has "12-volt" stamped into the case (I know that means nothing) and from some research, everything says it's a 12-volt. The voltage regulator appears fairly new and I don't...
5321. 5322
More pictures.