Thanks for the advice/information. It basically confirms what I was already thinking. I tried to fit everything back together after cleaning it and the gears really don't want to move along the shaft...
Type: Posts; User: alove
Thanks for the advice/information. It basically confirms what I was already thinking. I tried to fit everything back together after cleaning it and the gears really don't want to move along the shaft...
Hey guys, it's been awhile but I've finally found time to get the transmission apart and clean so I could share some pictures. Again, I'm wondering how to proceed given the condition of the parts....
I just saw that on another thread. Luckily, I did it correctly yesterday. It seemed much easier to drive the shaft into the case, so I did it that way. I will definitely shoot some pictures of the...
From a financial standpoint, I'd rather not pay someone to do something that I'm capable of doing. I think I've watched Rick Stivers video 20 times in the last 2 weeks! It's a great resource! I...
Good to know! I will pick some up! Should any be used in the diff boxes? I read a thread a while back where someone recommended using it on the spider gears. Would I be ok with 80/90 gear oil alone?
Hi all,
I just got my transmission separated from the transfer case and got to take a good look at it. My jeep was parked for many years, and it appears that the gasket on the top didn't do a...
What is the corn head grease? I read a thread about people using it in their dif boxes. I was under the impression that gear oil was used in both the steering box and the axles (but apparently a...
Thanks for all the advice! I just got the calipers and pads in and I have the brakes installed (with bleeders up)! I am opting to wait on purchasing a new master cylinder/proportioning valve setup...
Thanks! I will give the epoxy another try.
Hi all,
I couldn't find this in any threads, so I figured I would ask. I broke off the little metal tube in the steering gear box when I was taking the steering worm gear out during my initial...
What are the thoughts on this setup:
The kit that I bought from Brennan's Garage allows me to use calipers, pads, and rotors from Geo Tracker front disc brakes on all four wheels with Chevy S10...
Sounds like the original e-brake will totally work for my set-up.
Follow up question: If I stick with the front and rear disc setup, can I still use the stock hardlines? I am assuming I will need...
I pulled the engine and I'm planning to swap in a 4.3L out of an S10, so I'm not sure how that fits in. I believe I will be able to use the original transfer case with this setup, so I'm assuming I...
Stupid Question: Would that work with rear disc brakes or would I need to go with the original rear drum brakes?
Hey all,
I have been working on a full restoration of my great grandfather's '55 CJ5 and I have made it to the stage where I am replacing and upgrading the brakes. I opted to go for front and rear...
Update: I watched a few videos and did some playing around with the leaf springs and the leaf spring shackles. The fit is VERY tight, but I was able to get the OEM greaseable leaf spring shackle to...
Thanks for the tips! I ordered new pivot bolts and new shackles. The left hand thread shackles showed up, but not the right hand thread (which is annoying). I called Rough Country and they said it...
Hey guys,
So, I'm looking into a new suspension for my '55 CJ5 restoration project, since my original leaf springs were rusted and broken and my shocks have been blown since probably 1972. I have...
Hey guys,
So, after speaking with a friend, it occurred to me that I should get my new engine mounts welded in prior to priming and painting my frame (I am totally new to all of this). I have a...
Thanks guys! I have a lot of options to consider! I don't have the original seats or mounts unfortunately, so I will end up buying or fabricating mounts in some capacity. I'll be stealing the engine...
Those look great! Those are the type of seat that I'm looking for! The CJ5 has a tool box under the passenger seat and the fuel tank under the drivers seat, so I'm wondering how I would get seats...
Hi all,
I'm wondering if anyone has found a good option for putting new seats in a '55 CJ5. I would like something with a high back preferably to have some neck support. I have done some google...
Thanks, I'll check out the other threads. I appreciate the recommendation!
Hello all,
I am entirely new to any sort of auto restoration. I bought my great grandfather's 1955 CJ5, and I have been attempting to rescue it and bring it back to driving and usable condition. I...