Here's a picture of the floor pained black in the 1952. I think this is the original flooring as the screws holding in down are all the same and in the same holes on the frame as they were intended....
Type: Posts; User: dgoodenow
Here's a picture of the floor pained black in the 1952. I think this is the original flooring as the screws holding in down are all the same and in the same holes on the frame as they were intended....
I attached the one in progress, it has a twin stick PTO with a rear belt drum and a front winch. I'm putting a completely rust free 1948 cab and the stake bed that came with it, and the front clip...
Guys: I have two of these, a 1948 and a 1952, and both have the original stakes sideboard hardware and some of the sideboards intact, and they show signs of paint, and in the the color of the...
I am restoring a 1950 Willys stake bed truck and I need some help with the color of the bed. The only color picture I have found is one painted red and white. The attached picture did not scan the...
I needed one of these cross member brackets awhile back and found one with Midwest Willys:
(765) 362-2247
Harry & Jo Sheets
3708 S. 100 E.
Crawfordsville, IN 47933
email:...
Planer: I think you got some good advice from gmwillys. The only things I would add is a clean title in the name of the owner is a very bid deal. In many states it is very difficult to title a...
I got it. The flow from the bypass hose is from the water pump through the head and down into the block back to the water pump. Thanks.
Now I'm really confused. If the heater outlet in the head is caped off, there can be no circulation from the water pump through the head until the thermostat opens, so why would the bypass hose be...
Thinking more about this, it seems that the short hose between the water pump and the head would allow water circulation through the head and the heater and back to the water pump, before the...
Great. Thanks.
Guys: I recently purchased a Willys F134 engine that came from a 1964 CJ5. This one I'm told was running well but I notice it does not have the head to water pump bypass hose. Instead there are...
The instrument cluster in the truck is mostly shot, see attached, but the one I have to replace it is pretty nice, see attached. I also have the early truck/sedan delivery horn button for it. ...
I now have the engine running on an external tank, and the carb is working just fine. The water pump is leaking, but I guess that is to be expected, so I have one on order. All the other parts,...
Not sure what happened to the hood, it looks more like a crowbar job at the rear hinge plate as the rest of the hood looks pretty good. I have a same year Jeepster hood with the 3 hood emblem holes...
Guys: I just picked up a 1948 Willys 4T truck with the L134 four. It looks mostly original, but it does not have the original Carter WO 636S carb. What it does have is a Stromberg BXOV-2 14-22...
Guys: I am building up a 1950 1/2 Willys truck that came with the F134 engine but is in poor condition. I'm adding a the twin stick PTO to run the belt pulley off the back and the winch off the...
Thanks, but the regulator I have has screw adjustments. The only trouble was I turned the screw to the right and the volts went up, so I turned the screw to the left (no brainer) and the volts went...
"But, I have another concern. You mentioned that the regulator had about 8-volts in and out. If 8-volts is where the electrical system is running, that’s pretty high if the battery has topped off its...
That is great information. I tested the replacement regulator again this morning before I install it, and this time it read 2 ohms from ign to output. I think I was not making good contact before...
I found a discussion online about this instrument cluster voltage regulator. The discussion included a test procedure. It said the ign to case should read 42 ohms, and 0 ohms ign to output. The...
Guys: After thinking more about the comments on this page, I did a test. If I am getting about 8 volts to the temp gauge when the truck is running, and with a 6 volt battery, I should only get a...
Thanks for the information. I have a used instrument cluster with the attached voltage regulator, I will install that device and hope for the best. The voltage to the battery may be high because...
Guys: I'm redoing a 1952 Willys stake bed truck, see attached, and I am having trouble with the temperature gauge. The truck starts and runs well, but after a few minutes the temp gauge pegs to...
After three months of searching, I now have all the parts to outfit my Willys truck with both the front PTO winch and the rear PTO belt drive, see attached. Thanks to Dr. Matt in MN for the Koenig...
I found the fabric, Paul at Willys America had some left over from another project. Thanks Paul!