Search:

Type: Posts; User: bmorgil

Page 1 of 20 1 2 3 4

Search: Search took 0.01 seconds.

  1. Replies
    5
    Views
    35

    I have that KW 8126300 filter on mine. It is...

    I have that KW 8126300 filter on mine. It is period correct for the older Jeeps. The one gmwillys has sent the link on, is also on a few of my vehicles!

    The KW filter nearly bolts in. It goes...
  2. Replies
    7
    Views
    127

    That is truly bizarre. It is the same oil pump...

    That is truly bizarre. It is the same oil pump from 1946 to 1977. With that being the original Distributor something really weird there.
  3. Replies
    7
    Views
    127

    Mike, I would pull the oil pump and see if the...

    Mike, I would pull the oil pump and see if the distributor will drop all the way. At least that will tell you where the issue is.You certainly have checked it out! You are close enough to what I...
  4. Replies
    7
    Views
    127

    Mike, the distributor will only go in one way in...

    Mike, the distributor will only go in one way in one spot. The drive where it engages the oil pump is offset. If you look closely at it it is closer on one side than the other. It will only go into...
  5. Replies
    167
    Views
    6,970

    "what is a Pelago in uniform? " A decorated...

    "what is a Pelago in uniform? "

    A decorated Veteran, a hero, a friend to all!

    https://willysjeepforum.kaiserwillys.com/showthread.php?1421-well-the-darn-thing-is-out
  6. Replies
    14
    Views
    595

    Well here in Northwestern Ohio you would put that...

    Well here in Northwestern Ohio you would put that cap by the road with a sign that said "make offer". It would be gone shortly! You may want to put it up on the Willys for Sale site...
  7. Thread: 1957 cj-5

    by bmorgil
    Replies
    119
    Views
    19,523

    The metering rod provides the transition, cruise...

    The metering rod provides the transition, cruise and high speed fuel. If the rod fell out it should have been way rich everywhere but full load. Unless the rod fell into the jet closing it, then it...
  8. Replies
    167
    Views
    6,970

    5Jeeps, your imagination is matched only by your...

    5Jeeps, your imagination is matched only by your ability to find those old cool things you keep coming up with and posting! The "little GI Joe dude"!

    bb, this is like watching Jurassic Park.
  9. Thread: 1957 cj-5

    by bmorgil
    Replies
    119
    Views
    19,523

    Wow how did that happen? Do you have the screw...

    Wow how did that happen? Do you have the screw adjustable rod or the "bend the tab" adjustment?
  10. Replies
    167
    Views
    6,970

    Man that is so freekin' special!

    Man that is so freekin' special!
  11. Replies
    14
    Views
    595

    LarrBeard will be a big help here. Especially...

    LarrBeard will be a big help here. Especially with the pickup trucks you could get a lot of prior year parts into a newer year truck right from the factory. If the Title says 1957 but the serial...
  12. Replies
    14
    Views
    595

    Man another nice Truck! Welcome, that truck fits...

    Man another nice Truck! Welcome, that truck fits right in. Up here in the 'Rust Belt" we call that a pristine vehicle! That will restore nicely.
  13. Thread: +.085 pistons!

    by bmorgil
    Replies
    6
    Views
    241

    Andy, it is surprising that the bore is still...

    Andy, it is surprising that the bore is still good. unfortunately .080" is the max oversize. The piston to bore fit is maximum .005" for fit out of round and taper. So yes, if you are sure the piston...
  14. Replies
    167
    Views
    6,970

    The "Diamond" is good enough on the logo....

    The "Diamond" is good enough on the logo. Everyone who knows, knows what it stands for. You never see this much detail in a functioning model. I am just smiling over those U-Joints, I am certain I...
  15. Replies
    167
    Views
    6,970

    Classic on the Spicer logo! Clarence Spicer is no...

    Classic on the Spicer logo! Clarence Spicer is no doubt grinning.

    That is a "full load" in the second picture. The Transmission, The P.T.O. shifter, Transfer case shifters, and then in the rear it...
  16. Bob, I flipped mine straight up on the tailgate...

    Bob, I flipped mine straight up on the tailgate end, and propped it up at a slight angle so I could stand under it. I was able to get to the back side of the dash with ease, nearly standing up. Of...
  17. Sticky: The lube ratings can be so confusing I am adding...

    The lube ratings can be so confusing I am adding this to the conversation. The S.A.E. specification of 140 often gets confused with other 140 specifications. Compounding this the old Mil Spec of...
  18. No problem one 65r, we have to keep these baby's...

    No problem one 65r, we have to keep these baby's alive!
  19. Replies
    167
    Views
    6,970

    Spicer was on its own until 1946 when Charles...

    Spicer was on its own until 1946 when Charles Dana "Took over". Then the Dana name was put on a lot of things slowly phasing the Spicer name out. I think that is a picture of a model 20 you have...
  20. Nope wrong stuff for the steering box and...

    Nope wrong stuff for the steering box and knuckles. Don't get confused by the 140W specification. It means different things depending on what it is for. Gear oil is different than Steering box lube....
  21. Replies
    167
    Views
    6,970

    Looking great! Love the drive shafts! The Dana...

    Looking great! Love the drive shafts! The Dana Diamond on the T-Case is a nice touch. Technically it says "Spicer" inside the diamond. Dana was the parent company.
  22. Thread: 1957 cj-5

    by bmorgil
    Replies
    119
    Views
    19,523

    Mark if it runs better with a little choke, that...

    Mark if it runs better with a little choke, that is the classic plugged idle jet in a Carter carb (assuming no vacuum leaks). The Idle "Jet" is actually a tube with a tiny and I mean tiny hole in it....
  23. Replies
    7
    Views
    270

    The only way to get in there is a dip. Sand...

    The only way to get in there is a dip. Sand blasters can get in there pretty well but you will not get into the tubular front cross member or up behind the boxed areas all the way. When dipping the...
  24. Thread: 1957 cj-5

    by bmorgil
    Replies
    119
    Views
    19,523

    Mark, if you give it some choke can you get it to...

    Mark, if you give it some choke can you get it to idle down a little and stop surging and dying?
  25. Replies
    2
    Views
    139

    Haha! I love that. Its always a plus when they...

    Haha! I love that. Its always a plus when they are running and not making any more weird noses than usual.
Results 1 to 25 of 500
Page 1 of 20 1 2 3 4