Page 2 of 3 FirstFirst 123 LastLast
Results 11 to 20 of 24

Thread: g`day from queensland, australia.

  1. #11
    Senior Member
    Join Date
    Apr 2012
    Location
    Miriam Vale, Queensland, Australia.
    Posts
    110
    i have a couple of other vehicals to keep me busy as well as the willys.

    this is my daily driver. it is a 2003 built Ford Falcon BA ute. 4 litre straight six engine that runs LPG from the factory. i bought this brand new and plan to keep it for several more years. it has just clocked 200 000km.





    and this is my other toy. it is a 1975 Ford XB Fairmont sedan with a 400hp efi 351 cleveland and toplaoder gearbox. i have owned this car for almost 25 years. no plans to ever sell it.




  2. #12
    Junior Member
    Join Date
    Apr 2012
    Location
    Wisconsin
    Posts
    25
    Quote Originally Posted by dave351cid View Post
    i will need to get most of my parts from the states as there is not much willys gear available here anymore.
    If you ever need to mess with the brakes again, check to see if the shoes are availlable for a 1972 (I think) Wagoneer. That's another plus for the 11"x2" brakes, I buy my brake shoes at the local auto parts stores. Of course, I don't know if you had many Wagoneers in Oz land either. It's getting hard enough to find certain things here in the states. I can still get oil filters at the local store as well, maybe because they were also used on Massey tractors, but I went looking for a shim pack for the kingpins on a dana front end and NOTHING. That same front end was used up into the 70's and NOTHING. Unbelievable! Luckily, I actually had to take out shim instead of add it or I'd be making my own out of shim stock.....something else that auto parts stores have stopped carrying. You know; auto parts stores these days may well as be jiffy lubes because all they ever have in stock is oil and fluids.

    P.S. Mad max and Road Warrior are two of my favorite movies......Beyond Thunderdome, not so much.

  3. #13
    Junior Member
    Join Date
    Apr 2012
    Location
    Wisconsin
    Posts
    25
    Quote Originally Posted by dave351cid View Post
    i have a couple of other vehicals to keep me busy as well as the willys.

    this is my daily driver. it is a 2003 built Ford Falcon BA ute. 4 litre straight six engine that runs LPG from the factory. i bought this brand new and plan to keep it for several more years. it has just clocked 200 000km.


    That car is sweet looking! It's like a refined subaru brat/baja or a modern Ranchero/el camino. You spoiled folks down under probably got Nissan Skylines and Subaru WRX's way before us too.

  4. #14
    Senior Member
    Join Date
    Apr 2012
    Location
    Miriam Vale, Queensland, Australia.
    Posts
    110
    i know what you are saying about auto stores. not many that carry much parts anymore, or have any workers that know where to get parts.

    they are making a 4th version of Mad max now. will be interesting to see what its like. number one was the best.

  5. #15
    Senior Member
    Join Date
    Apr 2012
    Location
    Miriam Vale, Queensland, Australia.
    Posts
    110
    Quote Originally Posted by OBeer-WAN-Kenobi View Post
    That car is sweet looking! It's like a refined subaru brat/baja or a modern Ranchero/el camino. You spoiled folks down under probably got Nissan Skylines and Subaru WRX's way before us too.
    thanks. i guess it would be closer to the Ranchero. based on the Falcon sedan which is about the same size as the mustang i think.

    we have had WRXs here for a long time but most of our skylines are second hand imports from japan. i think you can buy them new from nissan here now , if you have enough $$$. not many new ones around.

  6. #16
    Senior Member
    Join Date
    Apr 2012
    Location
    Miriam Vale, Queensland, Australia.
    Posts
    110
    Quote Originally Posted by OBeer-WAN-Kenobi View Post
    I can still get oil filters at the local store as well, maybe because they were also used on Massey tractors,
    just curious. do you rember what model Massey tractor. my mate has a 226 willys truck.

  7. #17
    Junior Member
    Join Date
    Apr 2012
    Location
    Wisconsin
    Posts
    25
    Quote Originally Posted by dave351cid View Post
    just curious. do you rember what model Massey tractor. my mate has a 226 willys truck.
    The engine is actually a Continental Red Seal and was used by Massey, Willys (super hurricane), Kaiser (supersonic), Checker cabs and various implements like air compressors and forklifts.

    The Wix number is 51080
    I think Fram is C3 or C3p

    Here are the applications for Wix 51080 from the Wix website...hopefully this helps!

    Applications for part 51080 http://www.wixfilters.com/filterlook...asp?Part=51080

    Make Model Engine
    BARBER-GREENE+Ditchers 840B w / Hercules GO226 Engine
    BARBER-GREENE+Finishers 879A w / LeRoi D201 Engine
    BARBER-GREENE+Finishers 879B w / Hercules GO226 Engine
    BARBER-GREENE+Loaders 522 w / LeRoi Engine
    BARBER-GREENE+Trenchers 705B w / Chrysler IND30 Engine
    BLAW-KNOX+Paving Equipment 45 (Paver) w / Continental Engine
    BOMBARDIER+Crawler Tractors Models w / Chrysler 6-251 Engine
    CHAMPION+--Also See Cleveland--Motor Graders 507 w / Chrysler IND236 Engine
    DAVEY COMPRESSORS 160PVC w / Hercules JXD Engine
    DAVEY COMPRESSORS 160RP w / Hercules JXD Engine
    DAVEY COMPRESSORS 210WDS w / Hercules JXLD Engine
    FAIRBANKS-MORSE Models w / Hercules D1700 Engine
    FAIRBANKS-MORSE Models w / Hercules D2300 Engine
    GARDNER DENVER RP125G w / Hercules GO198 Engine
    GEHL+Harvesters Forage Harvester w / LeRoi D201 Engine
    GEHL+Harvesters WH125GB w / LeRoi Engine
    JEEP 6-226 L6 3.7L 226 CID
    JEEP FC150 L6 3.7L 226 CID
    JEEP TRUCK L6 3.7L 226 CID
    JEEP UTILITY L6 3.7L 226 CID
    JEEP UTILITY WAGON L6 3.7L 226 CID
    JEEP WILLYS L6 2.4L 148 CID
    JEEP WILLYS L6 2.6L 161 CID
    JEEP WILLYS L6 3.7L 226 CID
    JOHN DEERE+Combines, Forage & Sugar Cane Harvesters 45 (Combine) w / Hercules JX Engine
    LEROI+Compressors 105 Tractair w / LeRoi D226 Engine
    LEROI+Compressors 105G1 w / LeRoi D226 Engine
    LEROI+Compressors 105G2 w / LeRoi D226 Engine
    LEROI+Compressors 125 Tractair w / LeRoi D226 Engine
    LEROI+Compressors 125G1 w / LeRoi D226 Engine
    LEROI+Compressors 125G2 w / LeRoi D226 Engine
    LEROI+Compressors 170R2 w / LeRoi D226 Engine
    LEROI+Compressors 60G1 w / LeRoi D176 Engine
    LEROI+Compressors 75G1 w / Continental F140 Engine
    LEROI+Compressors 85G1 w / LeRoi D201 Engine
    LEROI+Tractors C1 w / LeRoi D140 Engine
    LEROI+Tractors M1 w / LeRoi D140 Engine
    LEROI+Tractors M2 w / LeRoi D140 Engine
    MASSEY-FERGUSON+(Also See Agco) Combines MF30 w / Continental Engine
    MASSEY-FERGUSON+(Also See Agco) Combines MF60 w / Continental Engine
    MASSEY-FERGUSON+(Also See Agco) Combines MF72 w / Continental Engine
    MASSEY-FERGUSON+Dozers, Loaders MF3165 w / Gas Engine
    MASSEY-FERGUSON+Tractors MF135 w / Continental Z145 Gas Engine
    MASSEY-FERGUSON+Tractors MF2500 w / Gas Engine
    MINNEAPOLIS-MOLINE+Combines 2890 w / Chrysler Engine
    MINNEAPOLIS-MOLINE+Combines 3490 w / Chrysler Engine
    MINNEAPOLIS-MOLINE+Combines 3496 w / Gas Engine
    MINNEAPOLIS-MOLINE+Combines 4290 w / Chrysler Engine
    MINNEAPOLIS-MOLINE+Combines 4292 w / 6 Cyl. Gas Engine
    MINNEAPOLIS-MOLINE+Combines 4292 w / 8 Cyl. Gas Engine
    MINNEAPOLIS-MOLINE+Tractors 3496 w / Chrysler Engine
    MINNEAPOLIS-MOLINE+Tractors 4292 w / Chrysler Engine
    MINNEAPOLIS-MOLINE+Tractors 4293 w / Chrysler Engine
    MINNEAPOLIS-MOLINE+Tractors 4296 w / Chrysler Engine
    NEW HOLLAND+Tractors 800 w / Continental FA244 Engine
    OLIVER+Combines,etc 430 w / Chrysler Engine
    OLIVER+Combines,etc 431 w / Chrysler Engine
    OLIVER+Combines,etc 522 w / Chrysler Engine
    OLIVER+Combines,etc 525 w / 6 Cyl. Gas Engine
    OLIVER+Combines,etc 535 w / Chrysler Engine
    OLIVER+Combines,etc 545 w / Chrysler Engine
    OLIVER+Combines,etc 5542 w / Chrysler Engine
    OLIVER+Combines,etc 5555 w / Chrysler Engine
    OLIVER+Tractors OC46 w / Hercules DD130 Engine
    OLIVER+Tractors OC46 w / Hercules GO130 Engine
    P & H HARNISCHFEGER+Misc. Equipment 105ATC w / Chrysler IND30 Engine
    P & H HARNISCHFEGER+Misc. Equipment 105BTC w / Chrysler IND30 Engine
    P & H HARNISCHFEGER+Misc. Equipment 105BTC w / Chrysler IND32 Engine
    P & H HARNISCHFEGER+Misc. Equipment 55ATC w / Chrysler IND30 Engine
    PACKARD ALL MODELS 8 CYL (ALL)
    PETTIBONE-MULLIKEN+Carry Lifts G30 w / Waukesha Engine
    PETTIBONE-MULLIKEN+Carry Lifts GA150 w / Hercules D3000 Engine
    PETTIBONE-MULLIKEN+Carry Lifts GA165 w / Hercules D3000 Engine
    PETTIBONE-MULLIKEN+Carry Lifts GA180 w / Hercules D3000 Engine
    PETTIBONE-MULLIKEN+Carry Lifts GS150 w / Hercules D3000 Engine
    PETTIBONE-MULLIKEN+Carry Lifts GS165 w / Hercules D3000 Engine
    PETTIBONE-MULLIKEN+Carry Lifts GS180 w / Hercules D3000 Engine
    PETTIBONE-MULLIKEN+Carry Lifts Super 6 w / Willys Engine
    PLYMOUTH PLYMOUTH L6 (ALL)
    PLYMOUTH PLYMOUTH V8 (ALL)
    QUINCY+Compressors QS160 w / Hercules G / D 2300 Engine
    SCOOP-MOBILE C w / Chrysler IND6 Engine
    SCOOP-MOBILE H w / Chrysler IND6 Engine
    SCOOP-MOBILE H5 w / Chrysler IND6 Engine
    SCOOP-MOBILE HP w / Chrysler IND6 Engine
    SCOOP-MOBILE HPS w / Chrysler IND6 Engine
    SCOOP-MOBILE LD5P w / Chrysler IND6 Engine
    SCOOP-MOBILE LD5T w / Chrysler IND6 Engine
    SILENT HOIST & CRANE Kranecar w / Chrysler IND30 Engine
    SILENT HOIST & CRANE Liftruck w / Chrysler IND30 Engine
    SMITH+Compressors 75 w / Chrysler IND32 Engine
    TRANSICOLD/CARRIER+Refrigeration Units 270 w / Hercules IXB Engine
    TROJAN+Division of Yale & Towne LA40 w / Hercules IXB4 Engine
    TROJAN+Division of Yale & Towne T18 w / Chrysler IND30 Engine
    UNIVERSAL+Generator Sets Models w / Hercules D1700 Engine
    UNIVERSAL+Generator Sets Models w / Hercules D2300 Engine
    VALMET+Tractors 110 w / Valmet 411ABS Engine
    VALMET+Tractors 110 w / Valmet 411AS Engine
    VALMET+Tractors 1110-4 w / Valmet 411ABS Engine
    VALMET+Tractors 1110-4 w / Valmet 411AS Engine
    VALMET+Tractors 1140 w / Valmet 411ABS Engine
    VALMET+Tractors 1140 w / Valmet 411AS Engine
    VALMET+Tractors 1140-4 w / Valmet 411ABS Engine
    VALMET+Tractors 1140-4 w / Valmet 411AS Engine
    VALMET+Tractors 710 w / Valmet 411A Engine
    VALMET+Tractors 710 w / Valmet 411B Engine
    VALMET+Tractors 740 w / Valmet 411A Engine
    VALMET+Tractors 740 w / Valmet 411B Engine
    VALMET+Tractors 910 w / Valmet 411A Engine
    VALMET+Tractors 910 w / Valmet 411AB Engine
    VALMET+Tractors 910-4 w / Valmet 411A Engine
    VALMET+Tractors 910-4 w / Valmet 411AB Engine
    VALMET+Tractors 940 w / Valmet 411A Engine
    VALMET+Tractors 940 w / Valmet 411AB Engine
    VALMET+Tractors 940-4 w / Valmet 411A Engine
    VALMET+Tractors 940-4 w / Valmet 411AB Engine
    WHITE+Combines--+Also See Agco 430 w / Chrysler Gas Engine
    WHITE+Combines--+Also See Agco 431 w / Chrysler Gas Engine
    WHITE+Combines--+Also See Agco 535 w / Chrysler Gas Engine
    WHITE+Combines--+Also See Agco 545 w / Chrysler Gas Engine
    WINPOWER+Generators-Diesel Driven DR15H4 w / Hercules D1700 Engine
    WINPOWER+Generators-Diesel Driven DR25H4 w / Hercules D2300 Engine
    WINPOWER+Generators-Gasoline Driven GR25H4 w / Hercules G2300 Engine

    Close Window
    Last edited by OBeer-WAN-Kenobi; 05-02-2012 at 09:07 AM.

  8. #18
    Junior Member
    Join Date
    Apr 2012
    Location
    Wisconsin
    Posts
    25
    Quote Originally Posted by dave351cid View Post
    i know what you are saying about auto stores. not many that carry much parts anymore, or have any workers that know where to get parts.

    they are making a 4th version of Mad max now. will be interesting to see what its like. number one was the best.
    They're making Mad Max 4 !!!!???? Sweet! Now I've got another one to look forward to along with "The Hobbit" and maybe, someday, a Halo movie.

    I think I liked "Road Warrior" best but it's close with the first one for sure.

  9. #19
    Senior Member
    Join Date
    Apr 2012
    Location
    Miriam Vale, Queensland, Australia.
    Posts
    110
    thanks for that list. i will copy it and give it to him next time i see him. he dosn`t use the computer much.
    the truck that he has is actually the same one that dad and my uncle had on the farm when i was a kid. i have moved about 1300km from my old home town so dont see him that often.

  10. #20
    Member
    Join Date
    May 2012
    Location
    Clare, South Australia
    Posts
    52
    Hi Dave that looks a nice XB. How is your Jeep coming along ?

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •