Results 1 to 4 of 4

Thread: 4 levers on the floor for what ??????????

  1. #1
    Junior Member
    Join Date
    Oct 2015
    Posts
    3

    4 levers on the floor for what ??????????

    I just bought a 52 wagon and it has 4 levers on the floor. I use the 3 speed lever. others ??????????
    thanks brad

  2. #2
    Two of the levers are for the transfer case. The other may be for an overdrive.

  3. #3
    Senior Member
    Join Date
    Apr 2012
    Location
    Miriam Vale, Queensland, Australia.
    Posts
    110
    originally it would have had 3 gear sticks. the fourth one is most likely for an after market overdrive or power take off (PTO) .

    # 1 = main 3 speed + reverse
    # 2 = front axle drive (4x4) in / out
    # 3 = low range / neutral / high range.
    # 4 = ??

    if it is an overdrive that will be a pretty good bonus for your purchase as they are pretty well sort after.

  4. #4
    Senior Member
    Join Date
    Jan 2015
    Location
    E OK
    Posts
    469
    Easy enough to tell what it is if you crawl under it. If it is for a PTO there will be an extra place to connect a drive shaft. The overdrive mounts to the back of the transfer case and looks kind of like a dome with nothing to connect to. Here is a picture of the PTO on my CJ2:
    Attached Images Attached Images

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •