Page 252 of 252 FirstFirst ... 152202242250251252
Results 2,511 to 2,512 of 2512

Thread: well, the darn thing is out

  1. #2511
    Senior Member pelago's Avatar
    Join Date
    May 2016
    Location
    easter north carolina
    Posts
    1,261
    Quote Originally Posted by bmorgil View Post
    those are the real deal. The extra hose goes to the air cleaner, according to that post.
    lots of hose then, not sure i like another hose

  2. #2512
    Super Moderator bmorgil's Avatar
    Join Date
    Dec 2018
    Location
    Northwestern Ohio
    Posts
    3,820
    I checked around the military sites and it seems that the line to the air cleaner was for the underwater fording. So when the motor diaphragm sucked in air it pulled it from the sealed up air cleaner system. I read in a few spots that it apparently never worked well and later model 50's era Military vehicles stopped using the extra hose.

    This was interesting about a restriction in the vacuum line to the distributor/wiper motor tee,

    From g503.com:
    Apparently the tee at the junction of the vacuum supply from the vac pump/vacuum to the wipers/tube from the distributor has a reducer, being a .040 constriction in the center part of the tee from the ignitor- this is to keep the vacuum flow from the distributor down a bit, so the vacuum to the wipers is still good. The way I chose to do this (not having the original tee, regrettably) was to put JB Weld in the reducer fitting to the copper line to the ignitor (the line from the vacuum pump, & to the wiper motors is 1/4", the center of the tee to the distributor is reduced to 3/16") and when fully cured I drilled a hole in the JB Weld with an .040 drill bit. Others have used other methods but that seemed an easy way to do it.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •