Results 1 to 2 of 2

Thread: Another Heep project

  1. #1
    Super Moderator gmwillys's Avatar
    Join Date
    Aug 2017
    Location
    Alabama
    Posts
    1,782

    Another Heep project

    There is no wonder to why don't get anything finished. I have taken on yet another Heep project. This one should be a fairly quick turnaround, but who am I fooling. At least it runs, drives, and stops on its own. It does need some frame rust repair though. The subject is an early '90s Wrangler.... Not even close to a Willys.
    Attached Images Attached Images

  2. #2
    Super Moderator gmwillys's Avatar
    Join Date
    Aug 2017
    Location
    Alabama
    Posts
    1,782
    Day 1. Pull the fuel tank and check the inner frame and crossmembers. Pull the front bumper off, and check out the front frame rails. The passenger side was damaged, and the driver's side was soft at the tie down point. I purchased a kit with all the normal frame rust spots patch panels. The kit is all Lazer cut, and are of good quality. The fitment was descent, and gives enough room to weld in around the crossmember and the steering box mount bolts.
    Attached Images Attached Images

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •