Results 1 to 10 of 2512

Thread: well, the darn thing is out

Threaded View

  1. #11
    Super Moderator gmwillys's Avatar
    Join Date
    Aug 2017
    Location
    Alabama
    Posts
    3,570
    Body work is a series of brute force and finesse. On dolly and off dolly, I'm still working on my technique. It does take a lot of practice. I was hoping to straighten out my wagons driver's side fender. I fear the metal is too thin to salvage. It has been heated over and over by the previous owner, so the metal is thin and brittle. Still trying to find one that is rusted out, so I can salvage the crown from the leading edge.
    As far as the rear seat mount, measure one side and make the other side match. If you have a back seat, place it. In position. Check the measurements, and run a level across the seat frame, then check with the floor. Make them match.
    Last edited by gmwillys; 11-27-2018 at 03:52 PM.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •