Results 1 to 4 of 4

Thread: Brake Problems - CJ3A

  1. #1
    Junior Member
    Join Date
    Nov 2016
    Posts
    11

    Brake Problems - CJ3A

    While I'm at it - let me also plea for help on the brakes:

    I currently have to pump the brakes three times to get pedal after doing the following:

    replacing all four wheel cylinders
    adjusting eccentrics on all four wheels
    bleeding the brakes at least 4 times
    replacing the master cylinder

    Perhaps I am not bleeding them correctly

  2. #2
    Super Moderator LarrBeard's Avatar
    Join Date
    Nov 2014
    Location
    Ft. Wayne, IN
    Posts
    1,593
    I'm not a brake guy, but two questions come to mind:

    A: How many times have the drums been turned? If they are oversized, they can need a longer throw to get things going.

    B. Brake linings? New, worn?

    C. Here's a place to get more information:

    http://www.cj3apage.com/cgi-bin/3Aya...m=1326729291/9

    These folks know everything about CJ-3's

  3. #3
    Junior Member
    Join Date
    Nov 2016
    Posts
    11
    Hey LarrBeard, I never answered your questions:

    Drums turned - no idea - they look good to me.
    Brake linings - new on the rear, front look good probably 1/8" thickness and not brittle

    Front eccentrics were not working properly, so I replaced one and the bottom adjusters were frozen - I tore down the front hubs this past weekend and have cleaned everything and will re-assemble and try it again. It is probably a combination of eccentric/bleeding issues.

  4. #4
    Junior Member
    Join Date
    Mar 2015
    Posts
    6
    Are you seeing the pads move on the first few pumps?

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •