Results 1 to 3 of 3

Thread: Looking for Specs

  1. #1
    Junior Member
    Join Date
    May 2017
    Posts
    1

    Looking for Specs

    I've been looking everywhere for frontend specs for a 1958 willys truck. I'm thinking about buying it but the frontend is gone, so I figured I'd put a straight axle under it if I can find out it would work. I checked on a assembly like would go under a gasser but need the following spec info; frame rail to frame rail, center pin to center pin on springs, and outer hub to outer hub for overall width. I'd like to find this info out before I commit to buying the truck. Anyone out there able to help me out, I've got till Sunday 6/4/17 to let the guy know. Thanks

  2. #2
    Administrator AmyB's Avatar
    Join Date
    Feb 2012
    Location
    Aiken, SC
    Posts
    159
    You could try Les at Doughertys Salvage: 218-349-3926, he has Willys Trucks in it and might be able to help.

  3. #3
    Junior Member
    Join Date
    May 2017
    Location
    Granada Hills CA.
    Posts
    1
    I have a 53 Truck and I am going to pull my complete 4 wheel drive out completely and putting an 8.8 rear end and straight axle in the front. so I will be selling the whole drive train including motor, trans and transfer case drive shafts.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •