Does anyone have tips or specs on rebuilding T14 transmission? I got mine all together wi and there is about .030 ballpark by eyeball end play on the reverse gear mainshaft. Like the bearing isnít tight against it. I built drivers and a special tool to hold thrust between the main shaft and input. The bearing doesnít seem to want to move any more and has that ďringĒ like itís fully seated. I just donít know if that gear sliding back and forth is correct. The gear is new from Herm.
Iíve rebuilt a few trans. T84. T90. And D 18 as well as some import manuals. But this is my first T14 and thereís not a lot of info out there.