The Frankenjeep

[bmorgil]

Wow Jeff you do have a tough one there. You could try some bread as gmwillys suggested. That might provide a better seal. I dont think its coming out with the grease method however. The correct way is to use a blind hole puller. I have a few different ones, it takes one with a fairly long arbor. You can rent them at auto parts stores. There are some out there for fairly cheap. They must have a long enough reach however.

It will come out if you cut it in two or three pieces with a hacksaw blade. The bushing is soft and it cuts fairly easy. Just take your time and cut it through in a few spots then take a small chisel and crush it. It will definitely come out that way. When they are very badly worn, sometimes that's the only way to get them out. Try not to damage the shaft I.D..