Results 1 to 7 of 7

Thread: New CJ 2A owner

  1. #1
    Junior Member
    Join Date
    Jul 2020
    Posts
    3

    New CJ 2A owner

    Just brought home a new to me 1946 CJ2A last night.

    My daughters and I got to ride in our local Independence Day parade last year, with a friend that has a 1950. Ever since they have been “nagging” me that we should have one as well. My youngest, soon to be 13, has expressed interest in helping with the work.

    I had a cj7 when in the ‘90s when in high school and have had a thing for Jeeps since.

    As for this one just need to get spark back, safety check it, enjoy for the summer and plan for the winter projects.

    EDBA74BD-0741-4BCD-933F-BF1A946DA35F.jpg
    Attached Images Attached Images

  2. #2
    Super Moderator bmorgil's Avatar
    Join Date
    Dec 2018
    Location
    Northwestern Ohio
    Posts
    1,207
    A nice find there for sure! I was in the 2nd huge Toledo Jeep Fest parade with my son in his big green crawler known as "Frahnkensteen", I was hooked. Went out and bought a 1950 and got started. I had it finished in time for the next years Jeep Fest parade, running it in that parade the following year. I can tell you for me it was fantastic! Introducing youth to mechanical things sometimes grows things you would not believe! The boy has more projects than I can count on two hands. I show up for local parades and what not when the weather is good. What a blast.

  3. #3
    Junior Member
    Join Date
    Jul 2020
    Posts
    3
    This might be a silly question, but was wondering on how to determine if the electrical system had been, actually converted to 12 volt. Previous owner gave some rather vague info on why no spark, 12 volt conversion with 6volt generator still there, don’t think he actually knew the answer.

    Thanks

  4. #4
    Super Moderator bmorgil's Avatar
    Join Date
    Dec 2018
    Location
    Northwestern Ohio
    Posts
    1,207
    No silly questions exist. If it has been converted it will have a 12 Volt battery. If all is working you should read 13 to 14 volts accrost the battery posts. Once you get it fired up.

    That being said it is possible to run it in 12 volts with the "original" generator. There are a few posts in here about this. Search for "Larrbeard" he has written a lot about this subject as have others. Basically you charge the battery by providing a regulated voltage to it. A generator puts out a lot of voltage. By "regulating" it down to the correct voltage you provide the current to charge. The original generator can and has been used successfully to charge 12 volt batteries with a 12 volt regulator. It does not provide the charging capability of a modern "Alternator" however. Take pictures of what you have. I don't see the direct relationship to no spark. In your Jeep finding out why there is no spark won't take long. Let us know if it gives you any trouble!

    As far as diagnosing "no spark" start at the coil, look for voltage on the positive terminal with the key on. The coil should say 12 volts right on it if it is a 12 volt system. One thing that happens quite frequently, people leave the key in the "on" position. On a modern car no problem, on a classic with points, big problem. If the points are closed and the key is on it burns the points and can overheat the coil. This leads to "no spark". See if you have voltage at the positive of the coil with the key on. If you have the correct voltage the points become suspect. The correct voltage at the coil will vary slightly depending on what coil is actually in there, and how it was wired. Some 12 volt coils require a ballast resistor to reduce the voltage slightly while running. If the coil needs a Ballast Resistor it will usually say so on the coil. Look for about 5 or 6 volts or 11 to 12 volts with the key on.
    Last edited by bmorgil; 07-08-2020 at 08:19 AM.

  5. #5
    Senior Member
    Join Date
    Nov 2019
    Location
    Oklahoma
    Posts
    333
    You got a nice find there! This is the place to go if you need help or advise.

  6. #6
    Junior Member
    Join Date
    Jul 2020
    Posts
    3
    Thanks for the info! Will start looking this afternoon...this pesky work thing gets in the way of enjoying the new project!!

  7. #7
    Super Moderator bmorgil's Avatar
    Join Date
    Dec 2018
    Location
    Northwestern Ohio
    Posts
    1,207
    Thank God you are working my man! Things are getting shaky in this COVID environment.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •