Page 9 of 109 FirstFirst ... 78910111959 ... LastLast
Results 81 to 90 of 1082

Thread: New to the Forum

  1. #81
    Senior Member TJones's Avatar
    Join Date
    Apr 2018
    Location
    Akron, Ohio
    Posts
    1,188
    Mike from Kaiser just emailed me back and this is what he sent me

    Hey Tim, here are the tie rods assemblies that are available:



    https://www.kaiserwillys.com/driver-...-cj-2a-3a-3b-5



    https://www.kaiserwillys.com/passeng...-cj-2a-3a-3b-5



    and this is how it’s setup:



    https://www.kaiserwillys.com/diagram...teering-system



    Let me know if you have any other questions.

  2. #82
    Super Moderator gmwillys's Avatar
    Join Date
    Aug 2017
    Location
    Alabama
    Posts
    3,775
    Mike is good, but his thinking is for a stock set up. I saw the one(s) from epay for $200. I have not had a chance to look at the Scout parts sources. Their prices are generally descent, unless you are looking for a quarter panel.... Then hold on to your wallet.

  3. #83
    Senior Member TJones's Avatar
    Join Date
    Apr 2018
    Location
    Akron, Ohio
    Posts
    1,188
    What about this GM?
    I could fabricate something like this drag link to go in the top bearing on the passenger side.905693_c.jpg
    I would feel much safer with a factory built knuckle.
    Last edited by TJones; 12-14-2018 at 04:42 PM.

  4. #84
    Super Moderator gmwillys's Avatar
    Join Date
    Aug 2017
    Location
    Alabama
    Posts
    3,775
    Scout parts.com has your knuckle for $250 and change. I.H. parts.com sells a conversion hi steer kit to move everything to the top of the knuckle for added clearance. At a quick glance, I saw a single hole, but am sure they would have a dual hole. Take a look at their design, and you could pattern yours to match if you chose to Fab your own.
    Last edited by gmwillys; 12-14-2018 at 04:55 PM.

  5. #85
    Senior Member TJones's Avatar
    Join Date
    Apr 2018
    Location
    Akron, Ohio
    Posts
    1,188
    That 2 hole must be obsolete from what I see.
    Last edited by TJones; 12-15-2018 at 10:57 AM.

  6. #86
    Super Moderator gmwillys's Avatar
    Join Date
    Aug 2017
    Location
    Alabama
    Posts
    3,775
    Scoutparts did have one, 273.23 with shipping. As far as obsolete, it all depends on the geometry of your steering configuration. With the Saginaw mounted on the frame horn,. It works well, with descent road manners. Never had a case of the dreaded death wobble with that configuration. Now, I didn't rack up huge miles on it back then.

  7. #87
    Senior Member TJones's Avatar
    Join Date
    Apr 2018
    Location
    Akron, Ohio
    Posts
    1,188
    I found a pair (left and right side for $200) on EBay for $200 and I made a offer of $75 let’s see if he takes it👍👍👍

  8. #88
    Senior Member TJones's Avatar
    Join Date
    Apr 2018
    Location
    Akron, Ohio
    Posts
    1,188
    It is Christmas time and I don’t want to wait until the eve to Christmas shop for the Bride so with a day off I might go to Summit racing and buy her a grab bar or something nice for the project
    How’s that sound? She’ll Love it 2843ADB5-FB2E-4F64-97C8-27434803E0FB.jpg
    That’s last year in Puerto Rico.
    Last edited by TJones; 12-15-2018 at 06:47 AM.

  9. #89
    Super Moderator gmwillys's Avatar
    Join Date
    Aug 2017
    Location
    Alabama
    Posts
    3,775
    All I can say is that if she does appreciate the oh sh*t handle, she's a definite keeper.

    I'll have to look to see if we have any pictures together. The long suffering misses runs from cameras.

  10. #90
    Senior Member TJones's Avatar
    Join Date
    Apr 2018
    Location
    Akron, Ohio
    Posts
    1,188
    DBC11AEA-B4F0-4877-8C9C-1B1CEEF19DDA.jpgI think what I’m going to do is hook up the tie rod under the knuckle and run the drag link from the steering box to the top of the knuckle on the passenger side and use chrome-moly heim joints with stainless 5/8 bolts.
    Last edited by TJones; 12-15-2018 at 08:12 AM.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •