Results 1 to 6 of 6

Thread: Carburetor

  1. #1

    Carburetor

    Has anybody installed a 2 barrel carburetor with a electric choke on a F134 1962 era jeep motor? If so what did did you use. Did it give you more power? How difficult was it to installation?

  2. #2
    Super Moderator gmwillys's Avatar
    Join Date
    Aug 2017
    Location
    Alabama
    Posts
    3,614
    I had read a while back about a guy who found a twin single barrel carb set up for his 2A or similar Jeep. He noted that it was a bear to adjust and sink the two carbs, and the results were not much better than in stock form. Kaiser Willys does have a conversion kit/carburetor to install a Webber carb. I have not seen it done as of yet, but the add claims to be significant....... The link to the installation guide is as follows;

    https://www.kaiserwillys.com/categor...j-3b-5-6-m38a1

    https://www.kaiserwillys.com/downloa...04-Install.pdf

  3. #3
    GMWillys, thank you for the information. Am checking out. Need to clear motor cover in a FC 150.

  4. #4
    Super Moderator gmwillys's Avatar
    Join Date
    Aug 2017
    Location
    Alabama
    Posts
    3,614
    You are welcome. Let us know what you find out. I do not know much about the FCs, but would love to learn more about them.

  5. #5
    Super Moderator LarrBeard's Avatar
    Join Date
    Nov 2014
    Location
    Ft. Wayne, IN
    Posts
    2,501
    A lady at work drove an FC 150 for a number of years. We called it "The Mugly Other".

    I've often wondered where it ended up ...

  6. #6
    Super Moderator gmwillys's Avatar
    Join Date
    Aug 2017
    Location
    Alabama
    Posts
    3,614
    Sebastian,

    I was tooling through ewillys.com, and he had posted some photos from the Ohio FC gathering. I know that there is another gathering in the southwest, that happens yearly. I believe that they have a facebook page that you may be able to find out more information from, in regards to you carburetor question.

    http://www.ewillys.com/2018/08/01/ph...o/#more-324991

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •