Results 1 to 4 of 4

Thread: CJ3A windshield vent stop

  1. #1
    Junior Member
    Join Date
    Jul 2018
    Posts
    5

    CJ3A windshield vent stop

    Any of you folks looking for the little loop to hold your vent lever in the open position on your 3A, just wander on over to the CJ3A Page, join and drop me a PM. As far as I know I am the only one foolish enough to make these little PITA’s. So if you need one this is where you can get one http://www.cj3apage.com
    Attached Images Attached Images

  2. #2
    Super Moderator gmwillys's Avatar
    Join Date
    Aug 2017
    Location
    Alabama
    Posts
    1,723
    Share your information with David over at ewillys.com. I'm sure there will be some folks over there that would be interested in your vent lever clips as well. They look well done!

    Thank you for sharing!

  3. #3
    Super Moderator LarrBeard's Avatar
    Join Date
    Nov 2014
    Location
    Ft. Wayne, IN
    Posts
    1,163
    Yep - you too could be a PITA supplier to the rest of us.

  4. #4
    Junior Member
    Join Date
    Jul 2018
    Posts
    5
    Thanks, looks like ewillys would link to the CJ3A page. Yeah it seemed kind of strange that you could buy replacement vent doors and handles, but not the stop which is very often missing. A few folks on the 3A site were looking for them, so I though I would spend an hour or so to see if I could make one that was a reasonable facsimile of the original. After only about 30 hours I did manage, so have been able to supply stops to those who need them. BTW if your vent handle Spring is shot, here is how to make a new one from a bicycle spoke http://www.cj3apage.com/cgi-bin/3Aya...7845/6#6%C2%A0 Have fun.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •