-
Front Brake Access
First time removing the front hub assemble to access the brakes.
I removed the 6 locking hub bolts, pulled the locking hub, and I find a snap ring holding additional gear parts. I'm a little lost as to what I do next.
IMG_2252.jpg
Last edited by CRWillys; 03-16-2019 at 05:34 PM.
-
I found out how to remove the flange however I'm still stuck trying to access the locking nuts so I can remove the drum. I'm dealing with what seams to be a washer with a rubber gasket around it. How do I remove the washer (has 3 dimples as you can see in the pics)?Attachment 4128Attachment 4129
-
Super Moderator
There is an outside snap ring on the splines, which you no doubt found. Then there is a large inside snap ring or spring steel ring that goes around the inside of the hub. This holds the guts in for the lock out hub. Use a pick to find the gap in the ring, and work it out of the groove. The hub nuts are located behind the lock out hub internals.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules