Results 1 to 4 of 4

Thread: CJ rear drivesahft bind after lifting or new springs

Threaded View

  1. #1
    Super Moderator bmorgil's Avatar
    Join Date
    Dec 2018
    Northwestern Ohio

    CJ rear drivesahft bind after lifting or new springs

    If you have lifted your early CJ or, have a new set of springs, you may feel the driveshaft bind when rotating it while extended. In other words, if you let the rear end hang down on the springs, the rear driveshaft will bind when you try to rotate it. This is not good. It can be remedied by installing a higher angle capable flange yoke on the transfer case brake drum. You should also drop the transfer case cross member down about 1/2" with solid spacers. This will greatly improve the slip yoke engagement as well as the angles.

    Use a Spicer 2-2-459 flange.
    Attached Images Attached Images
    Last edited by bmorgil; 09-28-2020 at 07:25 AM. Reason: Part number corection. Update URL

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts