Results 1 to 4 of 4

Thread: The correct lube for a Jeep synchronized transmission

Threaded View

  1. #1
    Super Moderator bmorgil's Avatar
    Join Date
    Dec 2018
    Location
    Northwestern Ohio
    Posts
    1,113

    The correct lube for a Jeep synchronized transmission

    Be sure when you install lube in the transmission/transfer case, that it is for synchronized transmissions. No EP additives should be in it. They (EP additives) have a few bad effects on synchronizer's, especially brass ones. I cannot tell you how many times someone put standard 90wt or 140wt gear oil into a bronze synchronized transmission, only to complain that now it is miserable to shift. Once its in there for a while, it usually effects the synchro's for good.

    First and foremost the common UN-spoken concept of the synchro, is not discussed in the "Lube" conversation. The synchro in the T90 is a brass cone clutch. As the shift collar is moved it engages the teeth on the synchro and the inside of the synchro (the cone) presses against the machined surface of the next gear, this pressure spins the next gear up to speed and the shift is "synchronized". Any EP additive impairs the pressure of the cone pressing against the gear to spin it up. This just screws up the shift.

    Next is the incompatibility of EP additives and brass synchro's. Most EP additives are corrosive to brass. There is a You Tube Video out there that is not quite accurate so, be careful! There is however some pretty good stuff put out by the manufactures. As always, dropping a line to the Tech Department at your preferred supplier is the way to go if you want to be sure of what you are buying. If they can't answer your questions with fact, buy elsewhere.

    The EP additive IS REQUIRED in the differential however!.
    Last edited by bmorgil; 01-11-2020 at 12:59 PM.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •