Results 1 to 4 of 4

Thread: Engine removal

  1. #1
    Junior Member
    Join Date
    May 2020
    Posts
    3

    Engine removal

    Hey guys, so having a little trouble with pulling out my 6-226. I have the manual and it says to lift if from the head bolts and I seen that there are lifting plates for the 4cyl. Does anyone know where to get the plates for the 6-226? Any help would be much appreciated. Thanks in advance.

  2. #2
    Junior Member
    Join Date
    Oct 2020
    Posts
    25
    Get them from a parts store. They are literally only a piece of steel with a hole for the head bolt and a hole for the hoist. But most people use a short length of chain with the bolt directly through the chain.

  3. #3
    Super Moderator bmorgil's Avatar
    Join Date
    Dec 2018
    Location
    Northwestern Ohio
    Posts
    3,559
    These work well depending on where you put them. They can be made fairly easy.

    https://www.jegs.com/p/Chevrolet-Per...01493/10002/-1

    https://www.amazon.com/OTC-7100-Auto...57102212&psc=1
    Last edited by bmorgil; 08-25-2022 at 04:43 PM.

  4. #4
    Super Moderator gmwillys's Avatar
    Join Date
    Aug 2017
    Location
    Alabama
    Posts
    3,570
    The OTC lift rings are well worth the money.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •