Hi Guys:

Its the old retired dealer again. In the finishing stages of a new glass body onto my 67 V6 CJ. I took the Painless wiring out before doing the body and put it back in. I labeled my wires and I also have the Painless book too. No spark. Not even a sputter. New coil. New battery. Coil's hot side is hot. Ground side is grounded well. I put a new spark plug wired to #1 on a good ground and it doesn't spark. I was always good in my parts dept but not so good in my service dept as you can tell. What am I missing?

Tim Gardner
Retired 70's Jeep Dealer
Florida