Page 1 of 2 12 LastLast
Results 1 to 10 of 18

Thread: 1960 Willys pickup project

  1. #1

    1960 Willys pickup project

    Hey everyone! Little new to the forum but looking for a little help with my project pickup. Iím purring back together a truck thatís been torn apart for years. I have a few brackets that I need to find homes for. At the moment I am trying to install the front fenders and am trying to figure out the front mounts.

  2. #2

  3. #3
    Super Moderator bmorgil's Avatar
    Join Date
    Dec 2018
    Location
    Northwestern Ohio
    Posts
    1,663
    That is a great looking project. It looks like there is quite a bit of it there, and in good shape.

  4. #4
    Super Moderator gmwillys's Avatar
    Join Date
    Aug 2017
    Location
    Alabama
    Posts
    2,594
    Welcome Xgreasemonkey,

    Snap a picture of the mounts, and we will see what you are referring to. The front fenders are pretty straight forward on the mounts. Usually the mounts along the underside of the cowl are rusted out to where the nut clips are gone.
    Attached Images Attached Images

  5. #5
    Junior Member
    Join Date
    Oct 2018
    Posts
    23
    Good luck with this build, make sure to keep us posted with the progress of this build.

  6. #6
    Is this the correct location of this bracket. Fenders were off the vehicle but it has whiteness marks that something was bolted to the fender.
    Attached Images Attached Images

  7. #7
    Does anyone recognize these little guys? Thanks for the replies.
    Attached Images Attached Images

  8. #8
    Senior Member 5JeepsAz's Avatar
    Join Date
    Aug 2019
    Posts
    468
    I've got the '64 so the next body style but some of those I've seen. Middle one could hold an armrest to the door panel, left one could be hood. If I had to guess it's interior for the cleaner ones, door, window, something. I'm no expert, just throwing stuff out there.

  9. #9
    Super Moderator bmorgil's Avatar
    Join Date
    Dec 2018
    Location
    Northwestern Ohio
    Posts
    1,663
    gmwillys can help here I bet. I am thinking the "dirty ones" look like the Air Cleaner to Firewall brackets.

  10. #10
    Super Moderator gmwillys's Avatar
    Join Date
    Aug 2017
    Location
    Alabama
    Posts
    2,594
    The first bracket on the left looks like a R/Front fender mount to the frame. I looked through the photos that I took during the disassembly, and I didn't take any of the fender mounts. Our wagon was a barnyard special, so it was pieced together with plow and harrow parts, and the original pieces were lost. I am certain that the last two pieces are splash shields, but will have to research.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •