Results 1 to 3 of 3

Thread: Speedi Sleeve for MB Axle

  1. #1
    Junior Member
    Join Date
    Jan 2021
    Location
    Central Jersey
    Posts
    4

    Speedi Sleeve for MB Axle

    All I am looking for experience on use of Speedi Sleeves on a worn axle on a 1941 MB front axle (size 1.191"). 1). Specifically did it work? 2). What company and size did you use?
    Attached Images Attached Images

  2. #2
    Super Moderator bmorgil's Avatar
    Join Date
    Dec 2018
    Location
    Northwestern Ohio
    Posts
    3,819
    You can use the SKF chart attached, or there are some others on line for the correct sleeve. It should be a 99118. The best price almost always seems to come from Rock Auto on those things. I use have used and have recommended spedi-sleeves (wear sleeves) for decades. Yes they work and work well. Proper installation is imperative. I usually press them on as opposed to driving them on. You will need to make a tool to press the sleeve on to your axle shaft. You could try 2" PVC pipe or something similar and turn the I.D. to size.if you need to. Always fill a deep grove with liquid metal first. Currently I have sleeves on a few components in my jeep, including on the axle seal surface.

    https://www.skf.com/us/products/indu...-speedi-sleeve

    https://www.rockauto.com/en/partsearch/?partnum=99118

    The sleeve will work well on the inner axle seal surface you have shown in your picture. That being said the sleeve will not repair a bearing surface.
    Last edited by bmorgil; 04-12-2021 at 01:26 PM.

  3. #3
    Super Moderator gmwillys's Avatar
    Join Date
    Aug 2017
    Location
    Alabama
    Posts
    3,780
    Just like Bmorgil said, Speedy sleeves have saved the day on a lot of worn seal surfaces. Now a bearing surface a sleeve will not work, because the sleeve would not withstand the press fit of a bearing.

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •