Work continues on the old Jeep,,,,,,,,,,The Kelly hardtop is in need of total disassembly for proper repairs to be made. Unfortunately I simply don't have enough spare time for this right now, AND want to use the Jeep through the winter for hunting season and as a "going to camp rig". Therefore I'm compromising and limiting repairs to attain functionality only, visual appearance concerns will have to wait until another time. With that said, the doors are biggest issue as neither window rolls up or down. In fact the passenger side glass is no longer attached to the regulator. Both door handles are terrible worn and no key to lock them. I purchased two new stainless steel lockable handles however the bolt pattern was different therefore requiring welding the existing assembly holes shut and redrilling new pattern. Long story short, new handles installed and windows repaired. Glued the passenger side glass back in place and the chain style regulators were cleaned and lubricated to restore functionality. The top isn't pretty, but it will do for now. Also important to pass along. While researching these hardtop wind components, they're obviously obsolete now, however I found that new chain style regulators were also used on commercial trucks (Kenworth), and they very likely could be retro fitted to these doors. IMG_2062.jpgIMG_2065.jpgIMG_2067.jpg